[PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown()

[Felipe Balbi]

Hi,,

On Mon, Jul 21, 2014 at 10:03:07AM +0200, Lothar Waßmann wrote:
> Hi,
> 
> > On Fri, Jul 18, 2014 at 11:31:29AM +0200, Lothar Waßmann wrote:
> > > This patch makes it possible to use the musb driver with HW that
> > > requires external regulators or clocks.
> > 
> > can you provide an example of such HW ? Are you not using the internal
> > PHYs ?
> > 
> The Ka-Ro electronics TX48 module uses the mmc0_clk pin as VBUSEN
> rathern than usb0_drvvbus. This patch makes it possible to use an
> external regulator to handle the VBUS switch through the 'vcc-supply'
> property of the underlying generic_phy device.

OK, I get it now. But why would not use usb0_drvvbus ? You could still
route usb0_drvvbus to the regulator enable pin and the regulator would
be enabled for you once correct values are written to the IP's mailbox.

I suppose this has something to do with layout constraints ?

cheers

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140721/e1f8ee68/attachment-0001.sig>