[PATCH 1/2] drivers/i2c/busses: use correct type for dma_map/unmap

[Wolfram Sang]

dma_{un}map_* uses 'enum dma_data_direction' not 'enum dma_transfer_direction'.

Signed-off-by: Wolfram Sang <wsa at the-dreams.de>
---
 drivers/i2c/busses/i2c-at91.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index e95f9ba96790..83c989382be9 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -210,7 +210,7 @@ static void at91_twi_write_data_dma_callback(void *data)
 	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
 
 	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
-			 dev->buf_len, DMA_MEM_TO_DEV);
+			 dev->buf_len, DMA_TO_DEVICE);
 
 	at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 }
@@ -289,7 +289,7 @@ static void at91_twi_read_data_dma_callback(void *data)
 	struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
 
 	dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg),
-			 dev->buf_len, DMA_DEV_TO_MEM);
+			 dev->buf_len, DMA_FROM_DEVICE);
 
 	/* The last two bytes have to be read without using dma */
 	dev->buf += dev->buf_len - 2;
-- 
2.0.0