[PATCH v7 0/6] cpufreq: use generic cpufreq drivers for exynos platforms

[Tomasz Figa]

Tobias,

On 19.07.2014 21:20, Tobias Jakobi wrote:
> Hello,
> 
> I have a question concerning an older version of this patchset, the one
> which still included exynos4x12 support and where the clocking data was
> provided through DT.
> 
> I tried to get this working for my ODROID-X2, which does work well,
> including the usage of the boost frequences. Since the X2 has an
> Exynos4412 Prime I added additional clocking data and operating points.
> 
> clocking data (comes from the vendor kernel):
> <1704000 3 7 0 6 1 2 7 0 7>
> <1600000 3 7 0 6 1 2 6 0 7>
> 
> operating points (again from vendor kernel):
> 1704000 1375000
> 1600000 1350000
> 
> Doing this I get correct output from scaling_available_frequencies and
> scaling_boost_frequencies and the driver seems to select these
> frequences. However when reading from cpufreq_cur_freq, which I think
> returns the frequency of the armclk, the maximum freq never exceeds
> 1.5GHz. So effectively the additional clocking data and opps are not used.
> 
> I wonder this happens? Is there some kind of limit enforced?

Have you also extended the array of allowed APLL settings in
drivers/clk/clk-exynos4.c?

Best regards,
Tomasz