[PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support

[Stefan Agner]

This adds support for the USB PHY in Vybrid VF610. We assume that
the disconnection without VBUS is also needed for Vybrid. For all
other flags, the presumption of innocence applies.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/usb/phy/phy-mxs-usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index c42bdf0..207946b 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = {
 		MXS_PHY_NEED_IP_FIX,
 };
 
+static const struct mxs_phy_data vf610_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
 static const struct of_device_id mxs_phy_dt_ids[] = {
 	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
 	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
 	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
-- 
2.0.1