[PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy

[Lothar Waßmann]

Make sure all parameters are correctly set up before registering the
PHY with the USB framework.

Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
 drivers/usb/phy/phy-am335x.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 91c71ab..6522fa7 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -56,11 +56,12 @@ static int am335x_phy_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	am_phy->usb_phy_gen.phy.init = am335x_init;
+	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
+
 	ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
 	if (ret)
 		return ret;
-	am_phy->usb_phy_gen.phy.init = am335x_init;
-	am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
 
 	platform_set_drvdata(pdev, am_phy);
 	device_init_wakeup(dev, true);
-- 
1.7.10.4