[PATCH 4/4] ARM: DTS: fix the chip select gpios definition in the SPI nodes

[Javier Martinez Canillas]

From: Naveen Krishna Chatradhi <ch.naveen at samsung.com>

This patch replaces the "cs-gpio" from "controller-data" node
as was specified in the old binding and uses the standard
"cs-gpios" property expected by the SPI core as is defined now
in the spi-s3c64xx driver DT binding.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen at samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
Reviewed-by: Tomasz Figa <t.figa at samsung.com>
---
 arch/arm/boot/dts/exynos4210-smdkv310.dts | 2 +-
 arch/arm/boot/dts/exynos4412-trats2.dts   | 2 +-
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 636d166..676e6e0 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -168,6 +168,7 @@
 	};
 
 	spi_2: spi at 13940000 {
+		cs-gpios = <&gpc1 2 0>;
 		status = "okay";
 
 		w25x80 at 0 {
@@ -178,7 +179,6 @@
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpc1 2 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7787844..11967f4 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -589,6 +589,7 @@
 	spi_1: spi at 13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
+		cs-gpios = <&gpb 5 0>;
 		status = "okay";
 
 		s5c73m3_spi: s5c73m3 {
@@ -596,7 +597,6 @@
 			spi-max-frequency = <50000000>;
 			reg = <0>;
 			controller-data {
-				cs-gpio = <&gpb 5 0>;
 				samsung,spi-feedback-delay = <2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..0c6433a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -316,6 +316,7 @@
 	};
 
 	spi_1: spi at 12d30000 {
+		cs-gpios = <&gpa2 5 0>;
 		status = "okay";
 
 		w25q80bw at 0 {
@@ -326,7 +327,6 @@
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpa2 5 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
-- 
2.0.0.rc2