[PATCH v4 2/4] usb: host: xhci-plat: Get PHYs for xhci's hcds

[Felipe Balbi]

On Wed, Jul 16, 2014 at 01:51:40PM +0530, Vivek Gautam wrote:
> The host controller by itself may sometimes need to handle PHY
> and/or calibrate some of the PHY settings to get full support out
> of the PHY controller. The PHY core provides a calibration
> funtionality now to do so.
> Therefore, facilitate getting the two possible PHYs, viz.
> USB 2.0 type (UTMI+) and USB 3.0 type (PIPE3).
> 
> Signed-off-by: Vivek Gautam <gautam.vivek at samsung.com>
> ---
> 
> Changes from v3:
>  - Modified error message as per review comments from Julius.
> 
>  drivers/usb/host/xhci-plat.c |   19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 1a0cf9f..b1c0364 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
>  #include <linux/slab.h>
>  #include <linux/usb/xhci_pdriver.h>
>  
> @@ -180,6 +181,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
>  			goto put_hcd;
>  	}
>  
> +	/* Get possile USB 2.0 type PHY (UTMI+) available with xhci */
> +	hcd->gen_phy = devm_phy_get(&pdev->dev, "usb2-phy");
> +	if (IS_ERR(hcd->gen_phy)) {
> +		ret = PTR_ERR(hcd->gen_phy);
> +		if (ret != -ENOSYS && ret != -ENODEV)
> +			dev_warn(&pdev->dev,
> +				 "Error retrieving usb2 phy: %d\n", ret);
> +	}

should you treat -EPROBE_DEFER differently here ?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140716/cf016ad7/attachment.sig>