[PATCH v4 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding
pramod gurav
pramod.gurav.etc at gmail.com
Wed Jul 16 03:06:09 PDT 2014
Hi Bjorn,
RPM breaks on IFC6410 without entry for 'qcom.ipc' node. Please find
my observations below.
On Wed, Jul 16, 2014 at 4:30 AM, Bjorn Andersson
<bjorn.andersson at sonymobile.com> wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices. The binding currently describes the rpm
> itself and the regulator subnodes.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson at sonymobile.com>
> ---
> .../devicetree/bindings/soc/qcom/qcom,rpm.txt | 263 +++++++++++++++++++++
> include/dt-bindings/soc/qcom,rpm.h | 142 +++++++++++
> 2 files changed, 405 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> create mode 100644 include/dt-bindings/soc/qcom,rpm.h
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> new file mode 100644
> index 0000000..ac98ffc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
> @@ -0,0 +1,263 @@
> +Qualcomm Resource Power Manager (RPM)
> +
.
[snip]
.
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
Was testing your patch on IFC6410 and looks like its breaking because
this node support not being in IFC DTs. I was using the earlier
versions of these patches and things were working. Please let me know
the changes needed in IFC6410 DT for qcom,ipc.
> +
> +
> += SUBDEVICES
> +
.
[snip]
.
> + Definition: resource as defined in <dt-bindings/soc/qcom/qcom,rpm.h>
> +
> +
> += EXAMPLE
> +
> + #include <dt-bindings/soc/qcom,rpm.h>
> +
> + rpm at 108000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
Tried adding this but there is no reference to 'apcs' registers itself
in any dts.
Without these changes rpm breaks hence not able to test SATA which needs rpm.
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
.
[snip]
.
> +
> +#endif
> --
> 1.8.2.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Thanks and Regards
Pramod
More information about the linux-arm-kernel
mailing list