[PATCH v4 03/11] ARM: OMAP2+: timer: Add suspend-resume callbacks for clkevent device

[Dave Gerlach]

On 07/15/2014 01:48 AM, Tony Lindgren wrote:
> * Dave Gerlach <d-gerlach at ti.com> [140714 10:44]:
>> Santosh, Tony,
>>
>> On 07/14/2014 09:37 AM, Santosh Shilimkar wrote:
>>> On Monday 14 July 2014 07:15 AM, Tony Lindgren wrote:
>>>> * Dave Gerlach <d-gerlach at ti.com> [140710 19:59]:
>>>>> From: Vaibhav Bedia <vaibhav.bedia at ti.com>
>>>>>
>>>>> OMAP timer code registers two timers - one as clocksource
>>>>> and one as clockevent. Since AM33XX has only one usable timer
>>>>> in the WKUP domain one of the timers needs suspend-resume
>>>>> support to restore the configuration to pre-suspend state.
>>>>>
>>>>> commit adc78e6 (timekeeping: Add suspend and resume
>>>>> of clock event devices) introduced .suspend and .resume
>>>>> callbacks for clock event devices. Leverages these
>>>>> callbacks to have AM33XX clockevent timer which is
>>>>> in not in WKUP domain to behave properly across system
>>>>> suspend.
>>>>>
>>>>> Signed-off-by: Vaibhav Bedia <vaibhav.bedia at ti.com>
>>>>> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
>>>>> ---
>>>>> v3->v4:
>>>>> 	Only use for am33xx soc now.
>>>>>
>>>>>   arch/arm/mach-omap2/timer.c | 28 ++++++++++++++++++++++++++++
>>>>>   1 file changed, 28 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>>>>> index 43d03fb..6fc1748 100644
>>>>> --- a/arch/arm/mach-omap2/timer.c
>>>>> +++ b/arch/arm/mach-omap2/timer.c
>>>>> @@ -128,6 +128,29 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
>>>>>   	}
>>>>>   }
>>>>>
>>>>> +static void omap_clkevt_suspend(struct clock_event_device *unused)
>>>>> +{
>>>>> +	struct omap_hwmod *oh;
>>>>> +
>>>>> +	oh = omap_hwmod_lookup(clockevent_gpt.name);
>>>>> +	if (!oh)
>>>>> +		return;
>>>>> +
>>>>> +	omap_hwmod_idle(oh);
>>>>> +}
>>>>> +
>>>>> +static void omap_clkevt_resume(struct clock_event_device *unused)
>>>>> +{
>>>>> +	struct omap_hwmod *oh;
>>>>> +
>>>>> +	oh = omap_hwmod_lookup(clockevent_gpt.name);
>>>>> +	if (!oh)
>>>>> +		return;
>>>>> +
>>>>> +	omap_hwmod_enable(oh);
>>>>> +	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
>>>>> +}
>>>>> +
>>>>
>>>> This is going to make moving the timer code into drivers one step
>>>> tougher to do. And you don't need to look up the hwmod entry every
>>>> time, just initialize it during the init.
>>
>> Yes you are right about looking up only at init I need to change that. I
>> agree that this makes moving the timers harder but I'm not sure there's any
>> way around this. I attempted to use the omap_device layer here but there is
>> no device at all created here, it does not hook into the normal PM layer
>> through omap_device. This clock must be shut off as it sits in the
>> peripheral power domain and any active clock within the domain will prevent
>> suspend from happening, so we end up with a platform specific issue here. It
>> seems that the only way I can get to the clock is through the hwmod.
>
> It's best to register these kind of functions as platform_data
> in pdata-quirks.c auxdata. That way when this moves to live
> in drivers/clocksource the driver does not need to know anything
> about the interconnect specific registers.
>
> Also, please don't use Linux generic names here.. Maybe use
> omap_clkevt_idle/unidle? The linux suspend and resume hooks
> and runtime PM could all use these functions then.

Ok to both of the above, I definitely like your suggestion better.

Regards,
Dave

>
>>>>> +	if (soc_is_am33xx()) {
>>>>> +		clockevent_gpt.suspend = omap_clkevt_suspend;
>>>>> +		clockevent_gpt.resume = omap_clkevt_resume;
>>>>> +	}
>>>>> +
>>>>
>>>> Maybe try to set up things so we initialize the SoC specific
>>>> timer suspend and resume functions in mach-omap2/timer.c
>>>> in a way where eventually the device driver can easily use
>>>> them?
>>>>
>>> +1. I had similar comments on the previous version too.
>>
>> This was my attempt to make things specific to only am335x based on
>> Santosh's previous comments as last time they were populated for every
>> device even when unneeded. These are not standard suspend/resume handlers,
>> they are specific to clock event. I know there will always need to be at
>> least some code here for the early timer init based on previous timer
>> cleanup series I've seen, so perhaps I could hook it in there when the time
>> comes?
>
> Well just adding a minimal include/linux/platform_data/timer-omap.h
> to pass those function pointers to the driver should do the trick.
>
> Regards,
>
> Tony
>