[RFC/PATCH 00/12] Krait clocks + Krait CPUfreq

[pramod gurav]

Hi Stephen,

On Wed, Jun 25, 2014 at 5:36 AM, Stephen Boyd <sboyd at codeaurora.org> wrote:

>
> Stephen Boyd (12):
>   ARM: Add Krait L2 register accessor functions
>   clk: Add safe switch hook
>   clk: qcom: Add support for muxes, dividers, and mux dividers
>   clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
>   clk: qcom: Add HFPLL driver
>   clk: qcom: Add MSM8960's HFPLLs
>   clk: qcom: Add support for Krait clocks
>   clk: qcom: Add KPSS ACC/GCC driver
>   clk: qcom: Add Krait clock controller driver
>   cpufreq: Add a cpufreq-krait based on cpufreq-cpu0
>   cpufreq: Add module to register cpufreq-krait device
>   ARM: dts: qcom: Add necessary DT data for Krait cpufreq
>

I have applied all these patches on 3.16-rc3. Compiled with below
minor change in drivers/cpufreq/Makefile to get cpufreq-krait.c
compiled:

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 6b8917b..8afbea4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)       +=
cpufreq_conservative.o
 obj-$(CONFIG_CPU_FREQ_GOV_COMMON)              += cpufreq_governor.o

 obj-$(CONFIG_GENERIC_CPUFREQ_CPU0)     += cpufreq-cpu0.o
-obj-$(CONFIG_CPUFREQ_KRAIT)            += cpufreq-krait.o
+obj-$(CONFIG_GENERIC_CPUFREQ_KRAIT)    += cpufreq-krait.o

 ##################################################################################
 # x86 drivers.

Tested cpufreq by enabling all governors in kernel. Tests done on
DB8074 board and Seen the frequency scaling as expected.

>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/



-- 
Thanks and Regards
Pramod