[PATCH 1/2] pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
Chen-Yu Tsai
wens at csie.org
Mon Jul 14 10:24:36 PDT 2014
When an IRQ is started on a GPIO line, mark this GPIO as IRQ in
the gpiolib so we can keep track of the usage centrally.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 47f5e1b..23c1b9f 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -541,18 +541,33 @@ static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
struct sunxi_desc_function *func;
+ int ret;
func = sunxi_pinctrl_desc_find_function_by_pin(pctl,
pctl->irq_array[d->hwirq], "irq");
if (!func)
return -EINVAL;
+ ret = gpio_lock_as_irq(pctl->chip, pctl->irq_array[d->hwirq]);
+ if (ret) {
+ dev_err(pctl->dev, "unable to lock HW IRQ %lu for IRQ\n",
+ irqd_to_hwirq(d));
+ return ret;
+ }
+
/* Change muxing to INT mode */
sunxi_pmx_set(pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval);
return 0;
}
+static void sunxi_pinctrl_irq_release_resources(struct irq_data *d)
+{
+ struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+
+ gpio_unlock_as_irq(pctl->chip, pctl->irq_array[d->hwirq]);
+}
+
static int sunxi_pinctrl_irq_set_type(struct irq_data *d, unsigned int type)
{
struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
@@ -657,6 +672,7 @@ static struct irq_chip sunxi_pinctrl_edge_irq_chip = {
.irq_mask = sunxi_pinctrl_irq_mask,
.irq_unmask = sunxi_pinctrl_irq_unmask,
.irq_request_resources = sunxi_pinctrl_irq_request_resources,
+ .irq_release_resources = sunxi_pinctrl_irq_release_resources,
.irq_set_type = sunxi_pinctrl_irq_set_type,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
@@ -670,6 +686,7 @@ static struct irq_chip sunxi_pinctrl_level_irq_chip = {
.irq_enable = sunxi_pinctrl_irq_ack_unmask,
.irq_disable = sunxi_pinctrl_irq_mask,
.irq_request_resources = sunxi_pinctrl_irq_request_resources,
+ .irq_release_resources = sunxi_pinctrl_irq_release_resources,
.irq_set_type = sunxi_pinctrl_irq_set_type,
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_EOI_THREADED |
IRQCHIP_EOI_IF_HANDLED,
--
2.0.1
More information about the linux-arm-kernel
mailing list