[PATCH v2 00/11] pwm: Introduce ST's PWM driver

Lee Jones lee.jones at linaro.org
Mon Jul 14 07:33:21 PDT 2014

Hi Thierry,

I'm pretty sure all of your review comments have been tended to
now.  Some have been fixed-up by myself and re-rolled into the
original set.  The larger changes have been fixed as subsequent
patches for ease of review and history tracking on the internal

Kind regards,

Ajit Pal Singh (4):
  pwm: st: Fix PWM prescaler handling
  pwm: sti: Ensure same period values for all channels
  pwm: sti: Sync between enable/disable calls
  pwm: sti: Remove PWM period table

Lee Jones (7):
  ARM: stih407: Add DT nodes for for PWM
  ARM: stih416: Add Pinctrl settings for PWM
  ARM: stih416: Add DT nodes for PWM
  ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E
  ARM: multi_v7_defconfig: Enable ST's PWM driver
  pwm: sti: Add new driver for ST's PWM IP
  pwm: sti: Supply Device Tree binding documentation for ST's PWM IP

 Documentation/devicetree/bindings/pwm/pwm-st.txt |  41 +++
 arch/arm/boot/dts/stih407.dtsi                   |  28 ++
 arch/arm/boot/dts/stih416-b2020e.dts             |  10 +
 arch/arm/boot/dts/stih416-pinctrl.dtsi           |  50 +++
 arch/arm/boot/dts/stih416.dtsi                   |  44 ++-
 arch/arm/configs/multi_v7_defconfig              |   1 +
 drivers/pwm/Kconfig                              |  10 +
 drivers/pwm/Makefile                             |   1 +
 drivers/pwm/pwm-sti.c                            | 418 +++++++++++++++++++++++
 9 files changed, 602 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-st.txt
 create mode 100644 drivers/pwm/pwm-sti.c


More information about the linux-arm-kernel mailing list