[PATCH v7 6/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support
Thomas Abraham
thomas.ab at samsung.com
Mon Jul 14 06:38:38 PDT 2014
From: Thomas Abraham <thomas.ab at samsung.com>
Exynos4210 and Exynos5250 based platforms have switched over to use generic
cpufreq drivers for cpufreq functionality. So the Exynos specific cpufreq
drivers for these platforms can be removed.
Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Reviewed-by: Amit Daniel Kachhap <amit.daniel at samsung.com>
Tested-by: Arjun K.V <arjun.kv at samsung.com>
---
drivers/cpufreq/Kconfig.arm | 22 ----
drivers/cpufreq/Makefile | 2 -
drivers/cpufreq/exynos4210-cpufreq.c | 184 -----------------------------
drivers/cpufreq/exynos5250-cpufreq.c | 210 ----------------------------------
4 files changed, 418 deletions(-)
delete mode 100644 drivers/cpufreq/exynos4210-cpufreq.c
delete mode 100644 drivers/cpufreq/exynos5250-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ebac671..7a2f289 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -28,17 +28,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ
config ARM_EXYNOS_CPUFREQ
bool
-config ARM_EXYNOS4210_CPUFREQ
- bool "SAMSUNG EXYNOS4210"
- depends on CPU_EXYNOS4210
- default y
- select ARM_EXYNOS_CPUFREQ
- help
- This adds the CPUFreq driver for Samsung EXYNOS4210
- SoC (S5PV310 or S5PC210).
-
- If in doubt, say N.
-
config ARM_EXYNOS4X12_CPUFREQ
bool "SAMSUNG EXYNOS4x12"
depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
@@ -50,17 +39,6 @@ config ARM_EXYNOS4X12_CPUFREQ
If in doubt, say N.
-config ARM_EXYNOS5250_CPUFREQ
- bool "SAMSUNG EXYNOS5250"
- depends on SOC_EXYNOS5250
- default y
- select ARM_EXYNOS_CPUFREQ
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
- If in doubt, say N.
-
config ARM_EXYNOS5440_CPUFREQ
bool "SAMSUNG EXYNOS5440"
depends on SOC_EXYNOS5440
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index db6d9a2..fac36ef 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -52,9 +52,7 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
-obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
deleted file mode 100644
index 61a5431..0000000
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos4210_volt_table[] = {
- 1250000, 1150000, 1050000, 975000, 950000,
-};
-
-static struct cpufreq_frequency_table exynos4210_freq_table[] = {
- {0, L0, 1200 * 1000},
- {0, L1, 1000 * 1000},
- {0, L2, 800 * 1000},
- {0, L3, 500 * 1000},
- {0, L4, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_4210[] = {
- /*
- * values:
- * freq
- * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
- APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
- APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
- APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
- APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
-};
-
-static void exynos4210_set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_4210[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
-
- do {
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
- } while (tmp & 0x1111111);
-
- /* Change Divider - CPU1 */
-
- tmp = apll_freq_4210[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
-
- do {
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
- } while (tmp & 0x11);
-}
-
-static void exynos4210_set_apll(unsigned int index)
-{
- unsigned int tmp, freq = apll_freq_4210[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
- >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
- tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
- } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4210_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- exynos4210_set_clkdiv(new_index);
- exynos4210_set_apll(new_index);
- } else if (old_index < new_index) {
- exynos4210_set_apll(new_index);
- exynos4210_set_clkdiv(new_index);
- }
-}
-
-int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "moutcore");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L2;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos4210_volt_table;
- info->freq_table = exynos4210_freq_table;
- info->set_freq = exynos4210_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_debug("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
deleted file mode 100644
index c91ce69..0000000
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS5250 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos5250_volt_table[] = {
- 1300000, 1250000, 1225000, 1200000, 1150000,
- 1125000, 1100000, 1075000, 1050000, 1025000,
- 1012500, 1000000, 975000, 950000, 937500,
- 925000
-};
-
-static struct cpufreq_frequency_table exynos5250_freq_table[] = {
- {0, L0, 1700 * 1000},
- {0, L1, 1600 * 1000},
- {0, L2, 1500 * 1000},
- {0, L3, 1400 * 1000},
- {0, L4, 1300 * 1000},
- {0, L5, 1200 * 1000},
- {0, L6, 1100 * 1000},
- {0, L7, 1000 * 1000},
- {0, L8, 900 * 1000},
- {0, L9, 800 * 1000},
- {0, L10, 700 * 1000},
- {0, L11, 600 * 1000},
- {0, L12, 500 * 1000},
- {0, L13, 400 * 1000},
- {0, L14, 300 * 1000},
- {0, L15, 200 * 1000},
- {0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_5250[] = {
- /*
- * values:
- * freq
- * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2
- * clock divider for COPY, HPM, RESERVED
- * PLL M, P, S
- */
- APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
- APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
- APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
- APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
- APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
- APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
- APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
- APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
- APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
- APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
- APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
- APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
- APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
- APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
- APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
- APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
-};
-
-static void set_clkdiv(unsigned int div_index)
-{
- unsigned int tmp;
-
- /* Change Divider - CPU0 */
-
- tmp = apll_freq_5250[div_index].clk_div_cpu0;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0)
- & 0x11111111)
- cpu_relax();
-
- /* Change Divider - CPU1 */
- tmp = apll_freq_5250[div_index].clk_div_cpu1;
-
- __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1);
-
- while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11)
- cpu_relax();
-}
-
-static void set_apll(unsigned int index)
-{
- unsigned int tmp;
- unsigned int freq = apll_freq_5250[index].freq;
-
- /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
- clk_set_parent(moutcore, mout_mpll);
-
- do {
- cpu_relax();
- tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU)
- >> 16);
- tmp &= 0x7;
- } while (tmp != 0x2);
-
- clk_set_rate(mout_apll, freq * 1000);
-
- /* MUX_CORE_SEL = APLL */
- clk_set_parent(moutcore, mout_apll);
-
- do {
- cpu_relax();
- tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU);
- tmp &= (0x7 << 16);
- } while (tmp != (0x1 << 16));
-}
-
-static void exynos5250_set_frequency(unsigned int old_index,
- unsigned int new_index)
-{
- if (old_index > new_index) {
- set_clkdiv(new_index);
- set_apll(new_index);
- } else if (old_index < new_index) {
- set_apll(new_index);
- set_clkdiv(new_index);
- }
-}
-
-int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
-{
- struct device_node *np;
- unsigned long rate;
-
- /*
- * HACK: This is a temporary workaround to get access to clock
- * controller registers directly and remove static mappings and
- * dependencies on platform headers. It is necessary to enable
- * Exynos multi-platform support and will be removed together with
- * this whole driver as soon as Exynos gets migrated to use
- * cpufreq-cpu0 driver.
- */
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock");
- if (!np) {
- pr_err("%s: failed to find clock controller DT node\n",
- __func__);
- return -ENODEV;
- }
-
- info->cmu_regs = of_iomap(np, 0);
- if (!info->cmu_regs) {
- pr_err("%s: failed to map CMU registers\n", __func__);
- return -EFAULT;
- }
-
- cpu_clk = clk_get(NULL, "armclk");
- if (IS_ERR(cpu_clk))
- return PTR_ERR(cpu_clk);
-
- moutcore = clk_get(NULL, "mout_cpu");
- if (IS_ERR(moutcore))
- goto err_moutcore;
-
- mout_mpll = clk_get(NULL, "mout_mpll");
- if (IS_ERR(mout_mpll))
- goto err_mout_mpll;
-
- rate = clk_get_rate(mout_mpll) / 1000;
-
- mout_apll = clk_get(NULL, "mout_apll");
- if (IS_ERR(mout_apll))
- goto err_mout_apll;
-
- info->mpll_freq_khz = rate;
- /* 800Mhz */
- info->pll_safe_idx = L9;
- info->cpu_clk = cpu_clk;
- info->volt_table = exynos5250_volt_table;
- info->freq_table = exynos5250_freq_table;
- info->set_freq = exynos5250_set_frequency;
-
- cpufreq = info;
-
- return 0;
-
-err_mout_apll:
- clk_put(mout_mpll);
-err_mout_mpll:
- clk_put(moutcore);
-err_moutcore:
- clk_put(cpu_clk);
-
- pr_err("%s: failed initialization\n", __func__);
- return -EINVAL;
-}
--
1.7.9.5
More information about the linux-arm-kernel
mailing list