[PATCH v2 01/10] iommu/ipmmu-vmsa: Refactor micro-TLB lookup

[Khiem Nguyen]

Hi Laurent,

On 7/14/2014 6:01 PM, Laurent Pinchart wrote:
> On Monday 14 July 2014 09:19:23 Khiem Nguyen wrote:
>> On 7/10/2014 7:37 PM, Laurent Pinchart wrote:
>>> On Thursday 10 July 2014 09:03:26 Khiem Nguyen wrote:
>>>> On 5/15/2014 7:40 PM, Laurent Pinchart wrote:
>>>>> Cache the micro-TLB number in archdata allocated in the .add_device
>>>>> handler instead of looking it up when the deviced is attached and
>>>>> detached. This simplifies the .attach_dev and .detach_dev operations and
>>>>> prepares for DT support.
>>>>
>>>> [snip]
>>>>
>>>>> Signed-off-by: Laurent Pinchart
>>>>> <laurent.pinchart+renesas at ideasonboard.com>
>>>>
>>>> [snip]
>>>>
>>>>> +static int ipmmu_find_utlb(struct ipmmu_vmsa_device *mmu, struct device
>>>>> *dev)
>>>>> +{
>>>>> +	const struct ipmmu_vmsa_master *master = mmu->pdata->masters;
>>>>> +	const char *devname = dev_name(dev);
>>>>> +	unsigned int i;
>>>>> +
>>>>> +	for (i = 0; i < mmu->pdata->num_masters; ++i, ++master) {
>>>>> +		if (strcmp(master->name, devname) == 0)
>>>>> +			return master->utlb;
>>>>> +	}
>>>>> +
>>>>> +	return -1;
>>>>> +}
>>>>
>>>> [snip]
>>>>
>>>>>  static int ipmmu_add_device(struct device *dev)
>>>>
>>>> [snip]
>>>>
>>>>>  	list_for_each_entry(mmu, &ipmmu_devices, list) {
>>>>> -		master = ipmmu_find_master(mmu, dev);
>>>>> -		if (master) {
>>>>> +		utlb = ipmmu_find_utlb(mmu, dev);
>>>>> +		if (utlb >= 0) {
>>>>>  			/*
>>>>> -			 * TODO Take a reference to the master to protect
>>>>> +			 * TODO Take a reference to the MMU to protect
>>>>>  			 * against device removal.
>>>>>  			 */
>>>>>  			break;
>>>>
>>>> [snip]
>>>>
>>>>> +	archdata->mmu = mmu;
>>>>> +	archdata->utlb = utlb;
>>>>
>>>> [snip]
>>>>
>>>> I have one question for ipmmu_add_device().
>>>>
>>>> In my understanding, your code will find utlb for device
>>>> base on device name.
>>>> For any device, it will /only/ return utlb number of first match.
>>>>
>>>> How about the case that a device name connected with more than 1 utlb ?
>>>> e.g DU device (rcar-du-r8a7790) in Lager
>>>>
>>>> Was that case already covered in your code ?
>>>
>>> For the DU case, the R8A7790 contains /two DU devices/, each connected to
>>> a single utlb. The IPMMU driver will thus work fine in that case.
>>
>> As my understanding, in board-lager-reference.c,
>> DU devices are registered with 1 device name "rcar-du-r8a7790".
>>
>> I also added some logs in ipmmu_add_device() to observe
>> the mapping between device name and utlb number.
>> And I saw that only one utlb is mapped with DU.
>>
>> Do I miss anything here ?
> 
> No, you're right, my bad. This is definitely a limitation of the driver at the 
> moment.

OK. Thanks for your confirmation.

> 
>>> I agree that this is a problem in general though, other devices (such as
>>> the DMAC) are connected to more than one utlb. This is currently not
>>> supported by the driver.
>>
>> Thanks for your confirmation.
>> I guess the driver will be improved in near future.
> 
> Yes, it will.
> 
I'm happy to wait for your update. :)

-- 
Best regards,
KHIEM Nguyen