[PATCH 1/6] mmc: sdhci-s3c: Fix local I/O clock gating

[Jaehoon Chung]

Looks good to me.

Acked-by: Jaehoon Chung <jh80.chung at samsung.com>

On 06/24/2014 10:57 PM, Tomasz Figa wrote:
> For internal card detection mechanism it is required that the local I/O
> clock is always running. However while current implementation accounts
> for this, it does so incorrectly leading to race conditions and warnings
> about unbalanced clock disables.
> 
> This patch fixes it by inverting the logic, which now increases local
> I/O clock enable count when internal card detect is used, instead of
> decreasing it otherwise.
> 
> Signed-off-by: Tomasz Figa <t.figa at samsung.com>
> Cc: Ben Dooks <ben-linux at fluff.org>
> Cc: Chris Ball <chris at printf.net>
> Cc: Ulf Hansson <ulf.hansson at linaro.org>
> Cc: linux-mmc at vger.kernel.org
> ---
>  drivers/mmc/host/sdhci-s3c.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index fa5954a..1795e1f 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -487,8 +487,13 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
>  		goto err_pdata_io_clk;
>  	}
>  
> -	/* enable the local io clock and keep it running for the moment. */
> -	clk_prepare_enable(sc->clk_io);
> +	/*
> +	 * Keep local I/O clock enabled for internal card detect pin
> +	 * or runtime PM is disabled.
> +	 */
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL
> +	    || !IS_ENABLED(CONFIG_PM_RUNTIME))
> +		clk_prepare_enable(sc->clk_io);
>  
>  	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
>  		char name[14];
> @@ -611,15 +616,13 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
>  		goto err_req_regs;
>  	}
>  
> -#ifdef CONFIG_PM_RUNTIME
> -	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> -		clk_disable_unprepare(sc->clk_io);
> -#endif
>  	return 0;
>  
>   err_req_regs:
>   err_no_busclks:
> -	clk_disable_unprepare(sc->clk_io);
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL
> +	    || !IS_ENABLED(CONFIG_PM_RUNTIME))
> +		clk_disable_unprepare(sc->clk_io);
>  
>   err_pdata_io_clk:
>  	sdhci_free_host(host);
>