[PATCH] ARM: dts: imx6: RIoTboard explicitly define pad settings

[Iain Paton]

Instead of relying on defaults or bootloader settings, explicitly define
all pad settings.

This resolves reported issues of no analogue audio output.

Signed-off-by: Iain Paton <ipaton0 at gmail.com>
---

I don't know if it's possible at this point, but it would be good if this 
could make it into 3.16.


 arch/arm/boot/dts/imx6dl-riotboard.dts | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 80c9268..43cb3fd 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -334,10 +334,10 @@
 	imx6-riotboard {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x8000000
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x8000000
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x8000000
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x8000000
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
 			>;
 		};
@@ -375,7 +375,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
 				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
 				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
 				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
@@ -388,9 +388,9 @@
 				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000	/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
 			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x80000000	/* AR8035 interrupt */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
@@ -425,8 +425,8 @@
 
 		pinctrl_led: ledgrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x80000000	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x80000000	/* user led1 */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
 			>;
 		};
 
@@ -492,8 +492,8 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x80000000	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
 			>;
 		};
 
@@ -505,8 +505,8 @@
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x80000000	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* SD2 WP */
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
 			>;
 		};
 
@@ -518,8 +518,8 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x80000000	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x80000000	/* SD3 WP */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
 			>;
 		};
 
@@ -531,7 +531,7 @@
 				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
 				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
 				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x80000000	/* SD4 RST (eMMC) */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
 			>;
 		};
 	};
-- 
1.8.5.1