[PATCH v4 4/6] PCI: designware: enhance dw core driver to support keystone PCI host controller
Murali Karicheri
m-karicheri2 at ti.com
Fri Jul 11 13:36:33 PDT 2014
Add API dw_pcie_v3_65_host_init() to support host controller initialization
for keystone PCI driver. The keystone PCI uses v3.65 version of the DW hardware
identified by compatibility string "dw,snps-pcie-v3.65". This allow for
different treatment for this version of the h/w during host initialization.
Key differences in v3.65 DW h/w are
1. No ATU support
2. Legacy and MSI irq functions are implemented in application
register space
3. MSI interrupts are multiplexed over 8 IRQ lines to the Host side.
So a msi irq chip is needed and the irq domain ops ptr is passed in
dw_pcie_v3_65_host_init() to allow re-use of common MSI code in dw core. The
keystone PCI host controller requires a modified pci scan function to allow
setup BAR0 for EP's access to MSI_IRQ register in application register to
raise MSI irq. So a ptr to pci hw ops struct is passed to the host init code.
keystone PCI controller re-uses the DW Core driver code wherever there is
common functionality. So this patch makes these functions global and added
their prototypes in pcie-designware.h to allow re-use on keystone.
Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
CC: Russell King <linux at arm.linux.org.uk>
CC: Grant Likely <grant.likely at linaro.org>
CC: Rob Herring <robh+dt at kernel.org>
CC: Mohit Kumar <mohit.kumar at st.com>
CC: Jingoo Han <jg1.han at samsung.com>
CC: Bjorn Helgaas <bhelgaas at google.com>
CC: Pratyush Anand <pratyush.anand at st.com>
CC: Richard Zhu <r65037 at freescale.com>
CC: Kishon Vijay Abraham I <kishon at ti.com>
CC: Marek Vasut <marex at denx.de>
CC: Arnd Bergmann <arnd at arndb.de>
CC: Pawel Moll <pawel.moll at arm.com>
CC: Mark Rutland <mark.rutland at arm.com>
CC: Ian Campbell <ijc+devicetree at hellion.org.uk>
CC: Kumar Gala <galak at codeaurora.org>
CC: Randy Dunlap <rdunlap at infradead.org>
CC: Grant Likely <grant.likely at linaro.org>
---
.../devicetree/bindings/pci/designware-pcie.txt | 2 +
drivers/pci/host/pcie-designware.c | 39 ++++++++++++++++++--
drivers/pci/host/pcie-designware.h | 7 ++++
3 files changed, 44 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d0d15ee..0cb10c0 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -2,6 +2,8 @@
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the core.
+ Additionally contains "dw,snps-pcie-v3.65" to identify v3.65 version of the DW
+ hardware.
- #address-cells: set to <3>
- #size-cells: set to <2>
- device_type: set to "pci"
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index c11e4de..4dcbebe 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -556,6 +556,37 @@ static int dw_pcie_msi_host_init(struct pcie_port *pp,
return 0;
}
+int __init dw_pcie_v3_65_host_init(struct pcie_port *pp, struct hw_pci *hw,
+ struct device_node *msi_irqc_np,
+ const struct irq_domain_ops *msi_irq_ops)
+{
+ int ret = -EINVAL;
+
+ /* check if compatible with v3.65 DW h/w */
+ if (!of_device_is_compatible(pp->dev->of_node, "dw,snps-pcie-v3.65")) {
+ dev_err(pp->dev,
+ "PCI Controller not compatible with v3.65 DW h/w\n");
+ goto out;
+ }
+ pp->version = DW_HW_V3_65;
+
+ /* v3.65 PCI controller is expected to provide its own PCI h/w ops */
+ if (!hw || !msi_irq_ops) {
+ dev_err(pp->dev,
+ "v3.65 PCI Controllers doesn't provide %s\n",
+ (hw == NULL) ? "PCI hw ops" : "PCI MSI irq domain ops");
+ goto out;
+ }
+
+ ret = dw_pcie_msi_host_init(pp, msi_irqc_np, msi_irq_ops);
+ if (ret)
+ goto out;
+
+ ret = dw_pcie_common_host_init(pp, hw);
+out:
+ return ret;
+}
+
int __init dw_pcie_host_init(struct pcie_port *pp)
{
int ret;
@@ -763,7 +794,7 @@ static struct pci_ops dw_pcie_ops = {
.write = dw_pcie_wr_conf,
};
-static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
+int dw_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct pcie_port *pp;
@@ -786,7 +817,7 @@ static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
struct pcie_port *pp = sys_to_pcie(sys);
@@ -803,7 +834,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
return bus;
}
-static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
int irq;
@@ -815,7 +846,7 @@ static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
return irq;
}
-static void dw_pcie_add_bus(struct pci_bus *bus)
+void dw_pcie_add_bus(struct pci_bus *bus)
{
if (IS_ENABLED(CONFIG_PCI_MSI)) {
struct pcie_port *pp = sys_to_pcie(bus->sysdata);
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index db0260f..2681826 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -81,4 +81,11 @@ void dw_pcie_msi_init(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
+int dw_pcie_v3_65_host_init(struct pcie_port *pp, struct hw_pci *hw,
+ struct device_node *msi_irqc_np,
+ const struct irq_domain_ops *msi_irq_ops);
+int dw_pcie_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys);
+void dw_pcie_add_bus(struct pci_bus *bus);
+int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#endif /* _PCIE_DESIGNWARE_H */
--
1.7.9.5
More information about the linux-arm-kernel
mailing list