[PATCH 5/8] of: Add Tegra124 EMC bindings
Mikko Perttunen
mperttunen at nvidia.com
Fri Jul 11 07:18:30 PDT 2014
Add binding documentation for the nvidia,tegra124-emc device tree
node.
Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com>
---
.../bindings/memory-controllers/tegra-emc.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
new file mode 100644
index 0000000..2dde17e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
@@ -0,0 +1,42 @@
+Tegra124 SoC EMC controller
+
+Required properties :
+- compatible : "nvidia,tegra124-emc".
+- reg : Should contain 1 or 2 entries:
+ - EMC register set
+ - MC register set : Required only if no node with
+ 'compatible = "nvidia,tegra124-mc"' exists. The MC register set
+ is first read from the MC node. If it doesn't exist, it is read
+ from this property.
+- timings : Should contain 1 entry for each supported clock rate.
+ Entries should be named "timing at n" where n is a 0-based increasing
+ number. The timings must be listed in rate-ascending order.
+
+Required properties for timings :
+- clock-frequency : Should contain the memory clock rate.
+- nvidia,parent-clock-frequency : Should contain the rate of the EMC
+ clock's parent clock.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - emc-parent : EMC's parent clock.
+- The following properties contain EMC timing characterization values:
+ - nvidia,emc-zcal-cnt-long
+ - nvidia,emc-auto-cal-interval
+ - nvidia,emc-ctt-term-ctrl
+ - nvidia,emc-cfg
+ - nvidia,emc-cfg-2
+ - nvidia,emc-sel-dpd-ctrl
+ - nvidia,emc-cfg-dig-dll
+ - nvidia,emc-bgbias-ctl0
+ - nvidia,emc-auto-cal-config
+ - nvidia,emc-auto-cal-config2
+ - nvidia,emc-auto-cal-config3
+ - nvidia,emc-mode-reset
+ - nvidia,emc-mode-1
+ - nvidia,emc-mode-2
+ - nvidia,emc-mode-4
+- nvidia,emc-burst-data : EMC timing characterization data written to
+ EMC registers.
+- nvidia,mc-burst-data : EMC timing characterization data written to
+ MC registers.
--
1.8.1.5
More information about the linux-arm-kernel
mailing list