[PATCH 4/6] tty: serial: 8250-core: reorder serial8250_stop_rx() & serial8250_start_tx()

[Sebastian Andrzej Siewior]

With the upcomming rs485 support it is required that
serial8250_stop_rx() is called from serial8250_start_tx(). With this
reordering there is no need for a forward declaration of the former
function.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
---
 drivers/tty/serial/8250/8250_core.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 1a91a89..c7c3bf7 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1306,6 +1306,21 @@ static void serial8250_stop_tx(struct uart_port *port)
 	pm_runtime_put_autosuspend(port->dev);
 }
 
+static void serial8250_stop_rx(struct uart_port *port)
+{
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
+
+	pm_runtime_get_sync(port->dev);
+
+	up->ier &= ~UART_IER_RLSI;
+	up->port.read_status_mask &= ~UART_LSR_DR;
+	serial_port_out(port, UART_IER, up->ier);
+
+	pm_runtime_mark_last_busy(port->dev);
+	pm_runtime_put_autosuspend(port->dev);
+}
+
 static void serial8250_start_tx(struct uart_port *port)
 {
 	struct uart_8250_port *up =
@@ -1339,21 +1354,6 @@ static void serial8250_start_tx(struct uart_port *port)
 	pm_runtime_put_autosuspend(port->dev);
 }
 
-static void serial8250_stop_rx(struct uart_port *port)
-{
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
-
-	pm_runtime_get_sync(port->dev);
-
-	up->ier &= ~UART_IER_RLSI;
-	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_port_out(port, UART_IER, up->ier);
-
-	pm_runtime_mark_last_busy(port->dev);
-	pm_runtime_put_autosuspend(port->dev);
-}
-
 static void serial8250_enable_ms(struct uart_port *port)
 {
 	struct uart_8250_port *up =
-- 
2.0.1