[PATCH 2/3] ARM: dts: Update the parent for Audss clocks in Exynos5420

[Javier Martinez Canillas]

Hello Doug,

On Wed, Jul 9, 2014 at 6:01 PM, Doug Anderson <dianders at google.com> wrote:
> Javier,
>
> On Wed, Jul 9, 2014 at 6:03 AM, Javier Martinez Canillas
> <javier at dowhile0.org> wrote:
>> Hello Tushar,
>>
>> On Wed, Jul 9, 2014 at 2:11 PM, Tushar Behera <trblinux at gmail.com> wrote:
>>> On 07/09/2014 03:44 PM, Javier Martinez Canillas wrote:
>>>> Hello Tushar,
>>>>
>>>> On Tue, Jul 8, 2014 at 5:00 AM, Tushar Behera <trblinux at gmail.com> wrote:
>>>>>>>
>>>>>>> The u-boot version is a little different on my Peach-Pi as compared to
>>>>>>> the market release version. Not sure if that is making any difference.
>>>>>>>
>>>>>>> Peach # version
>>>>>>>
>>>>>>> U-Boot 2013.04 (Feb 13 2014 - 16:35:03) for Peach
>>>>>>> armv7a-cros-linux-gnueabi-gcc.real (4.8.1_cos_gg_feea904_4.8.1-r66)
>>>>>>> 4.8.x-google 20130905 (prerelease)
>>>>>>> GNU ld (binutils-2.22_cos_gg_2) 2.22
>>>>>>>
>>>>>>
>>>>
>>>> I'm using the same U-Boot version than Kevin (U-Boot 2013.04-gb98ed09)
>>>> and on my setup using chained nv-uboot I also need patch 1/3 along
>>>> with 2/3 to fix the issue.
>>>>
>>>>>> Note that I've applied this only from this series so I'm not sure how
>>>>>> much the problem can be solved...any updates for 1/3 and 3/3?
>>>>>>
>>>>>> - Kukjin
>>>>>
>>>>> Thanks for applying 2/3. I am working on 1/3 to see if we are following
>>>>> the right approach to fix Kevin's issue (unfortunately, I am not hitting
>>>>> the bug on my board ATM). 3/3 has already been merged through a
>>>>> different patchset.
>>>>>
>>>>
>>>> I'm sending as an attachment my complete boot log when booting today's
>>>> next (20140709) until it hangs and my u-boot env vars. I hope that
>>>> helps.
>>>>
>>>
>>> Would you please check the behaviour after enabling following config
>>> options?
>>>
>>> diff --git a/arch/arm/configs/exynos_defconfig
>>> b/arch/arm/configs/exynos_defconfig
>>> index e07a227..d6056ab 100644
>>> --- a/arch/arm/configs/exynos_defconfig
>>> +++ b/arch/arm/configs/exynos_defconfig
>>> @@ -93,6 +93,11 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
>>>  CONFIG_FONTS=y
>>>  CONFIG_FONT_7x14=y
>>>  CONFIG_LOGO=y
>>> +CONFIG_SOUND=y
>>> +CONFIG_SND=y
>>> +CONFIG_SND_SOC=y
>>> +CONFIG_SND_SOC_SAMSUNG=y
>>> +CONFIG_SND_SOC_SNOW=y
>>>  CONFIG_USB=y
>>>  CONFIG_USB_EHCI_HCD=y
>>>  CONFIG_USB_EHCI_EXYNOS=y
>>> @@ -109,6 +114,8 @@ CONFIG_MMC_DW_IDMAC=y
>>>  CONFIG_MMC_DW_EXYNOS=y
>>>  CONFIG_RTC_CLASS=y
>>>  CONFIG_RTC_DRV_S3C=y
>>> +CONFIG_DMADEVICES=y
>>> +CONFIG_PL330_DMA=y
>>>  CONFIG_COMMON_CLK_MAX77686=y
>>>  CONFIG_EXT2_FS=y
>>>  CONFIG_EXT3_FS=y
>>>
>>>
>>
>> With those Kconfig options enabled the kernel does not hang anymore so
>> patch 1/3 is not needed in that case.
>
> Just checking: did you happen to confirm whether it's the PL330 /
> DMADEVICES that fixes things or do you actually need the sound stuff?

Sorry I should had mentioned this before. The DMADEVICES and PL330
Kconfig are enough to avoid the kernel to hang, the sound config
options are not actually required.

Best regards,
Javier