[PATCH v3 0/7] ARM: at91: move aic driver to drivers/irqchips

[Nicolas Ferre]

On 20/06/2014 17:01, Boris BREZILLON :
> Hello,
> 
> This series moves the AIC driver to the irqchip directory and make use of
> the generic chip framework whenever possible.
> 
> This driver only support DT boards (all legacy board files should be soon
> replaced by their DT versions).
> 
> Best Regards,

I repeat here for clarity:

Boris,
Once the AIC and AIC5 drivers are split, you can add my:

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

And send the whole series to Jason.

Jason,
like you said in your response to patch #3/7, we can share a topic
branch so that both arm-soc and yourself have this material in our trees
and can go forward with other patch series on top of this one...

Thanks for your work and review. Bye,


> Changes since v2:
>  - remove irq line muxing definition
>  - rework Kconfig options
> 
> Changes since v1:
>  - rework the irq-mux bindings
> 
> Boris BREZILLON (7):
>   genirq: generic chip: export irq_map_generic_chip function
>   irqchip: atmel-aic: move binding doc to interrupt-controller directory
>   irqchip: atmel-aic: add new atmel AIC driver
>   ARM: at91: introduce OLD_IRQ_AT91 Kconfig option
>   ARM: at91: enclose at91_aic_xx calls in
>     IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks
>   ARM: at91: make use of the new AIC driver for dt enabled boards
>   ARM: at91: remove old irq material
> 
>  .../devicetree/bindings/arm/atmel-aic.txt          |  42 --
>  .../bindings/interrupt-controller/atmel,aic.txt    |  42 ++
>  arch/arm/mach-at91/Kconfig                         |  17 +-
>  arch/arm/mach-at91/Kconfig.non_dt                  |   6 +
>  arch/arm/mach-at91/Makefile                        |   3 +-
>  arch/arm/mach-at91/board-dt-rm9200.c               |  13 -
>  arch/arm/mach-at91/board-dt-sam9.c                 |  13 -
>  arch/arm/mach-at91/board-dt-sama5.c                |  13 -
>  arch/arm/mach-at91/irq.c                           | 270 +-------
>  arch/arm/mach-at91/pm.c                            |  32 +-
>  arch/arm/mach-at91/setup.c                         |   3 +-
>  drivers/irqchip/Kconfig                            |   7 +
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/irqchip/irq-atmel-aic.c                    | 700 +++++++++++++++++++++
>  include/linux/irq.h                                |   2 +
>  kernel/irq/generic-chip.c                          |   5 +-
>  16 files changed, 800 insertions(+), 369 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/atmel-aic.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
>  create mode 100644 drivers/irqchip/irq-atmel-aic.c
> 


-- 
Nicolas Ferre