[PATCHv2 10/17] ARM: mvebu: add CA9 MPcore SoC Controller node
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Wed Jul 9 06:40:14 PDT 2014
From: Gregory CLEMENT <gregory.clement at free-electrons.com>
The CA9 MPcore SoC Control block is a set of registers that allows to
configure certain internal aspects of the core blocks of the SoC
(Cortex-A9, L2 cache controller, etc.). In most cases, the default
values are fine so they aren't many reasons to touch those registers,
but there is one exception: to support cpuidle on Armada 38x, we need
to modify the value of the CA9 MPcore Reset Control register.
Therefore, this commit adds a new Device Tree binding for this
hardware block, and uses this new binding for the Armada 38x Device
Tree file.
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: devicetree at vger.kernel.org
---
.../devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt | 14 ++++++++++++++
arch/arm/boot/dts/armada-38x.dtsi | 5 +++++
2 files changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 0000000..8781073
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+ datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl at 20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 689fa1a..242d0ec 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -286,6 +286,11 @@
reg = <0x20800 0x10>;
};
+ mpcore-soc-ctrl at 20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+ };
+
coherency-fabric at 21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
--
2.0.0
More information about the linux-arm-kernel
mailing list