[PATCH] net: mvneta: fix operation in 10 Mbit/s mode

[Thomas Petazzoni]

As reported by Maggie Mae Roxas, the mvneta driver doesn't behave
properly in 10 Mbit/s mode. This is due to a misconfiguration of the
MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED
must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed,
which the driver was not properly doing. This commit adjusts that by
setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode,
and relying on the fact that all the speed related bits of this
register are cleared at the beginning of the mvneta_adjust_link()
function.

This problem exists since c5aff18204da0 ("net: mvneta: driver for
Marvell Armada 370/XP network unit") which is the commit that
introduced the mvneta driver in the kernel.

Cc: <stable at vger.kernel.org> # v3.8+
Fixes: c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Reported-by: Maggie Mae Roxas <maggie.mae.roxas at gmail.com>
Cc: Maggie Mae Roxas <maggie.mae.roxas at gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 45beca1..d49f08d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2529,7 +2529,7 @@ static void mvneta_adjust_link(struct net_device *ndev)
 
 			if (phydev->speed == SPEED_1000)
 				val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
-			else
+			else if (phydev->speed == SPEED_100)
 				val |= MVNETA_GMAC_CONFIG_MII_SPEED;
 
 			mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-- 
2.0.0