socfpga/sockit ethernet problems

[Stefan Roese]

Hi!

On 07.07.2014 23:43, Pavel Machek wrote:
>> All of this stuff is not needed as it's already taken care of by the
>> Micrel phy driver. The clock skew values are now represented in the DTS.
>> Please look at:
>>
>> Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
>
> Aah, thanks for the pointer.
>
> At least socfpga_cyclone5_socrates.dts is in the mainline, but it does
> not have any skew configuration. That may explain why the board seems
> to have problems with ethernet... (or not).
>
> Are there suitable default values?
>
> u-boot uses these defaults:
>
> include/configs/socfpga_common.h:#define CONFIG_KSZ9021_CLK_SKEW_VAL
> 0xf0f0
> include/configs/socfpga_common.h:#define CONFIG_KSZ9021_DATA_SKEW_VAL
> 0x0
>
> ...that should correspond to txc-skew-ps == rxc-skew-ps == 3000, all
> other skew values == 0?
>
> Could someone with socrates board and network problems test if this
> makes any difference?

SoCrates uses a different PHY, the Lantiq PEF7071 (PHY11G). So those dts 
additions have no effect on SoCrates.

Thanks,
Stefan