[PATCH 0/5] Add a driver for the atmel ram controller

[Alexandre Belloni]

The atmel ram controller needs one or more clocks to work. For now the
CLK_IGNORE_UNUSED flag is used on those clocks. This patch set introduce a
driver that will take care of taking those clocks.

The final goal is also to move the ioremap done in mach-at91 to that driver with
a proper power management driver.

Alexandre Belloni (5):
  memory: add a driver for atmel ram controllers
  ARM: at91: select ATMEL_RAMC when using OF
  ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks
  ARM: at91/dt: at91sam9: use ddrck in ramc
  clk: at91: remove the useless CLK_IGNORE_UNUSED flag

 .../devicetree/bindings/arm/atmel-at91.txt         |  1 +
 arch/arm/boot/dts/at91sam9n12.dtsi                 |  2 +
 arch/arm/boot/dts/at91sam9x5.dtsi                  |  2 +
 arch/arm/boot/dts/sama5d3.dtsi                     |  9 +-
 arch/arm/mach-at91/Kconfig                         |  4 +
 drivers/clk/at91/clk-system.c                      |  8 +-
 drivers/memory/Kconfig                             |  8 ++
 drivers/memory/Makefile                            |  1 +
 drivers/memory/atmel-ramc.c                        | 96 ++++++++++++++++++++++
 9 files changed, 123 insertions(+), 8 deletions(-)
 create mode 100644 drivers/memory/atmel-ramc.c

-- 
1.9.1