[PATCH v2 22/30] ARM: shmobile: r8a7740: Add CMT1 node

[Simon Horman]

This describes all of the CMT1 hardware of the r8a7740.
The node is disabled and may be enabled as necessary by board DTS files.

Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

---
N.B: This only adds cmt1, as per the legacy C code

v2
* First post
---
 arch/arm/boot/dts/r8a7740.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 3156afd..ea728e1 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -260,6 +260,16 @@
 		status = "disabled";
 	};
 
+	cmt1: timer at e6138000 {
+		compatible = "renesas,cmt-48";
+		reg = <0xe6138000 0x170>;
+		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+
+		renesas,channels-mask = <0x3f>;
+
+		status = "disabled";
+	};
+
 	tpu: pwm at e6600000 {
 		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
 		reg = <0xe6600000 0x100>;
-- 
2.0.0.rc2