[PATCH 17/19] gpio: samsung: Remove legacy support of S5PV210
Tomasz Figa
t.figa at samsung.com
Fri Jul 4 10:48:17 PDT 2014
GPIO support of S5PV210 SoC is now fully handled by pinctrl-samsung
driver making the old code in gpio-samsung driver unused. This patch
removes it which will also let us remove more code from arch subtree.
Signed-off-by: Tomasz Figa <t.figa at samsung.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Alexandre Courbot <gnurou at gmail.com>
Cc: linux-gpio at vger.kernel.org
---
drivers/gpio/gpio-samsung.c | 240 --------------------------------------------
1 file changed, 240 deletions(-)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 7d4281e..27298fd 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1169,234 +1169,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
#endif
};
-/*
- * Followings are the gpio banks in S5PV210/S5PC110
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure samsung_gpio_cfgs[3] in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of samsung_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-
-static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
-#ifdef CONFIG_CPU_S5PV210
- {
- .chip = {
- .base = S5PV210_GPA0(0),
- .ngpio = S5PV210_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPA1(0),
- .ngpio = S5PV210_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPB(0),
- .ngpio = S5PV210_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC0(0),
- .ngpio = S5PV210_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPC1(0),
- .ngpio = S5PV210_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD0(0),
- .ngpio = S5PV210_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPD1(0),
- .ngpio = S5PV210_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE0(0),
- .ngpio = S5PV210_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPE1(0),
- .ngpio = S5PV210_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF0(0),
- .ngpio = S5PV210_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF1(0),
- .ngpio = S5PV210_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF2(0),
- .ngpio = S5PV210_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPF3(0),
- .ngpio = S5PV210_GPIO_F3_NR,
- .label = "GPF3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG0(0),
- .ngpio = S5PV210_GPIO_G0_NR,
- .label = "GPG0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG1(0),
- .ngpio = S5PV210_GPIO_G1_NR,
- .label = "GPG1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG2(0),
- .ngpio = S5PV210_GPIO_G2_NR,
- .label = "GPG2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPG3(0),
- .ngpio = S5PV210_GPIO_G3_NR,
- .label = "GPG3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPI(0),
- .ngpio = S5PV210_GPIO_I_NR,
- .label = "GPI",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ0(0),
- .ngpio = S5PV210_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ1(0),
- .ngpio = S5PV210_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ2(0),
- .ngpio = S5PV210_GPIO_J2_NR,
- .label = "GPJ2",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ3(0),
- .ngpio = S5PV210_GPIO_J3_NR,
- .label = "GPJ3",
- },
- }, {
- .chip = {
- .base = S5PV210_GPJ4(0),
- .ngpio = S5PV210_GPIO_J4_NR,
- .label = "GPJ4",
- },
- }, {
- .chip = {
- .base = S5PV210_MP01(0),
- .ngpio = S5PV210_GPIO_MP01_NR,
- .label = "MP01",
- },
- }, {
- .chip = {
- .base = S5PV210_MP02(0),
- .ngpio = S5PV210_GPIO_MP02_NR,
- .label = "MP02",
- },
- }, {
- .chip = {
- .base = S5PV210_MP03(0),
- .ngpio = S5PV210_GPIO_MP03_NR,
- .label = "MP03",
- },
- }, {
- .chip = {
- .base = S5PV210_MP04(0),
- .ngpio = S5PV210_GPIO_MP04_NR,
- .label = "MP04",
- },
- }, {
- .chip = {
- .base = S5PV210_MP05(0),
- .ngpio = S5PV210_GPIO_MP05_NR,
- .label = "MP05",
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC00),
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = S5PV210_GPH0(0),
- .ngpio = S5PV210_GPIO_H0_NR,
- .label = "GPH0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC20),
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = S5PV210_GPH1(0),
- .ngpio = S5PV210_GPIO_H1_NR,
- .label = "GPH1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC40),
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = S5PV210_GPH2(0),
- .ngpio = S5PV210_GPIO_H2_NR,
- .label = "GPH2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO + 0xC60),
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = S5PV210_GPH3(0),
- .ngpio = S5PV210_GPIO_H3_NR,
- .label = "GPH3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-#endif
-};
-
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
- struct samsung_gpio_chip *chip;
- int i, nr_chips;
- int group = 0;
-
/*
* Currently there are two drivers that can provide GPIO support for
* Samsung SoCs. For device tree enabled platforms, the new
@@ -1420,21 +1195,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else if (soc_is_s5pv210()) {
- group = 0;
- chip = s5pv210_gpios_4bit;
- nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (!chip->config) {
- chip->config = &samsung_gpio_cfgs[3];
- chip->group = group++;
- }
- }
- samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
-#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
- s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-#endif
} else {
WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
return -ENODEV;
--
1.9.3
More information about the linux-arm-kernel
mailing list