[PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support
Javier Martinez Canillas
javier.martinez at collabora.co.uk
Fri Jul 4 04:35:56 PDT 2014
Hello Krzysztof,
On 07/04/2014 01:30 PM, Krzysztof Kozlowski wrote:
> On pią, 2014-07-04 at 11:55 +0200, Javier Martinez Canillas wrote:
>> Maxim MAX77802 is a power management chip that contains 10 high
>> efficiency Buck regulators, 32 Low-dropout (LDO) regulators used
>> to power up application processors and peripherals, a 2-channel
>> 32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface
>> to program the individual regulators, clocks outputs and the RTC.
>>
>> This patch adds support for MAX77802 to the MAX77686 driver and is
>> based on a driver added to the Chrome OS kernel 3.8 by Simon Glass.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
>> ---
>>
>> NOTE: I didn't carry previous {Review,Acked,Tested}-by tags since
>> this patch extending MAX77686 is quite different than the old one
>> adding a new mfd driver. So review and test is highly appreciated.
>>
>> Changes since v5:
>> - Extend the 77686 driver to support 77802 instead of adding a new driver.
>> Suggested by Lee Jones.
>>
>> Changes since v4:
>> - Use consistent expressions when checking for NULL values.
>> Suggested by Krzysztof Kozlowski.
>> - Remove unused defines. Suggested by Krzysztof Kozlowski.
>> - Explain why IRQ is disabled on suspend. Suggested by Krzysztof Kozlowski.
>>
>> Changes since v3:
>> - Remove unnecessary OOM error message since the mm subsystem already logs it.
>>
>> Changes since v2:
>> - Split the DT binding docs in a separate patch and improve the documentation.
>> Suggested by Mark Brown.
>> - Add all the devices in the MFD driver instead of doing in separate patches.
>> Suggested by Mark Brown.
>>
>> Changes since v1:
>> - Convert max77{686,802} to regmap irq API and get rid of max77{686,802}-irq.c
>> Suggested by Krzysztof Kozlowski.
>> - Don't protect max77802 mfd_cells using Kconfig options since mfd core omits
>> devices that don't match. Suggested by Lee Jones.
>> - Change mfd driver to be tristate instead of boolean. Suggested by Mark Brown.
>> - Change binding "voltage-regulators" property to "regulators" to be consistent
>> with other PMIC drivers. Suggested by Mark Brown.
>> - Use regulators node names instead of the deprecated "regulator-compatible"
>> property. Suggested by Mark Brown.
>> - Use the new descriptor-based GPIO interface instead of the deprecated
>> ---
>> drivers/mfd/Kconfig | 6 +-
>> drivers/mfd/max77686.c | 187 ++++++++++++++++++++++++++-----
>> include/linux/mfd/max77686-private.h | 208 ++++++++++++++++++++++++++++++++++-
>> include/linux/mfd/max77686.h | 60 +++++++++-
>> 4 files changed, 428 insertions(+), 33 deletions(-)
>>
>
> Three comments below, after fixing:
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>
> (...)
>
>> @@ -55,6 +123,17 @@ static struct regmap_config max77686_rtc_regmap_config = {
>> .val_bits = 8,
>> };
>>
>> +static struct regmap_config max77802_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .writeable_reg = max77802_is_accessible_reg,
>> + .readable_reg = max77802_is_accessible_reg,
>> + .precious_reg = max77802_is_precious_reg,
>> + .volatile_reg = max77802_is_volatile_reg,
>> + .name = "max77802-pmic",
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> static const struct regmap_irq max77686_irqs[] = {
>> /* INT1 interrupts */
>> { .reg_offset = 0, .mask = MAX77686_INT1_PWRONF_MSK, },
>> @@ -98,9 +177,34 @@ static const struct regmap_irq_chip max77686_rtc_irq_chip = {
>> .num_irqs = ARRAY_SIZE(max77686_rtc_irqs),
>> };
>>
>> +static const struct regmap_irq_chip max77802_irq_chip = {
>> + .name = "max77802-pmic",
>> + .status_base = MAX77802_REG_INT1,
>> + .mask_base = MAX77802_REG_INT1MSK,
>> + .num_regs = 2,
>> + .irqs = max77686_irqs, /* same masks than 77686 */
>
> "same masks as 77686"
>
Ok
>> + .num_irqs = ARRAY_SIZE(max77686_irqs),
>> +};
>> +
>> +static const struct regmap_irq_chip max77802_rtc_irq_chip = {
>> + .name = "max77802-rtc",
>> + .status_base = MAX77802_RTC_INT,
>> + .mask_base = MAX77802_RTC_INTM,
>> + .num_regs = 1,
>> + .irqs = max77686_rtc_irqs, /* same masks than 77686 */
>
> Ditto
>
Ok
>> + .num_irqs = ARRAY_SIZE(max77686_rtc_irqs),
>> +};
>> +
>> static const struct of_device_id max77686_pmic_dt_match[] = {
>> - {.compatible = "maxim,max77686", .data = NULL},
>> - {},
>> + {
>> + .compatible = "maxim,max77686",
>> + .data = (void *)TYPE_MAX77686,
>> + },
>> + {
>> + .compatible = "maxim,max77802",
>> + .data = (void *)TYPE_MAX77802,
>> + },
>> + { },
>> };
>>
>> static void max77686_dt_parse_dvs_gpio(struct device *dev)
>> @@ -236,6 +340,12 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
>> struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev);
>> unsigned int data;
>> int ret = 0;
>> + const struct regmap_config *config;
>> + const struct regmap_irq_chip *irq_chip;
>> + const struct regmap_irq_chip *rtc_irq_chip;
>> + struct regmap **rtc_regmap;
>> + const struct mfd_cell *cells;
>> + int n_devs;
>>
>> if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata)
>> pdata = max77686_i2c_parse_dt_pdata(&i2c->dev);
>> @@ -258,56 +368,77 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
>> max77686->wakeup = pdata->wakeup;
>> max77686->irq = i2c->irq;
>>
>> - max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
>> + if (max77686->type == TYPE_MAX77686) {
>> + config = &max77686_regmap_config;
>> + irq_chip = &max77686_irq_chip;
>> + rtc_irq_chip = &max77686_rtc_irq_chip;
>> + rtc_regmap = &max77686->rtc_regmap;
>> + cells = max77686_devs;
>> + n_devs = ARRAY_SIZE(max77686_devs);
>> + } else {
>> + config = &max77802_regmap_config;
>> + irq_chip = &max77802_irq_chip;
>> + rtc_irq_chip = &max77802_rtc_irq_chip;
>> + rtc_regmap = &max77686->regmap;
>> + cells = max77802_devs;
>> + n_devs = ARRAY_SIZE(max77802_devs);
>> + }
>> +
>> + max77686->regmap = devm_regmap_init_i2c(i2c, config);
>> if (IS_ERR(max77686->regmap)) {
>> ret = PTR_ERR(max77686->regmap);
>> dev_err(max77686->dev, "Failed to allocate register map: %d\n",
>> - ret);
>> + ret);
>> return ret;
>> }
>>
>> ret = regmap_read(max77686->regmap, MAX77686_REG_DEVICE_ID, &data);
>> if (ret < 0) {
>> dev_err(max77686->dev,
>> - "device not found on this channel (this is not an error)\n");
>> - return -ENODEV;
>> - }
>> -
>> - max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
>> - if (!max77686->rtc) {
>> - dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n");
>> + "device not found on this channel\n");
>> return -ENODEV;
>> }
>> - i2c_set_clientdata(max77686->rtc, max77686);
>>
>> - max77686->rtc_regmap = devm_regmap_init_i2c(max77686->rtc,
>> - &max77686_rtc_regmap_config);
>> - if (IS_ERR(max77686->rtc_regmap)) {
>> - ret = PTR_ERR(max77686->rtc_regmap);
>> - dev_err(max77686->dev, "failed to allocate RTC regmap: %d\n",
>> - ret);
>> - goto err_unregister_i2c;
>> + if (max77686->type == TYPE_MAX77686) {
>> + max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
>> + if (!max77686->rtc) {
>> + dev_err(max77686->dev,
>> + "Failed to allocate I2C device for RTC\n");
>> + return -ENODEV;
>> + }
>> + i2c_set_clientdata(max77686->rtc, max77686);
>> +
>> + max77686->rtc_regmap =
>> + devm_regmap_init_i2c(max77686->rtc,
>> + &max77686_rtc_regmap_config);
>> + if (IS_ERR(max77686->rtc_regmap)) {
>> + ret = PTR_ERR(max77686->rtc_regmap);
>> + dev_err(max77686->dev,
>> + "failed to allocate RTC regmap: %d\n",
>> + ret);
>> + goto err_unregister_i2c;
>> + }
>> }
>>
>> ret = regmap_add_irq_chip(max77686->regmap, max77686->irq,
>> IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
>> - IRQF_SHARED, 0, &max77686_irq_chip,
>> + IRQF_SHARED, 0, irq_chip,
>> &max77686->irq_data);
>> if (ret) {
>> dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret);
>> goto err_unregister_i2c;
>> }
>> - ret = regmap_add_irq_chip(max77686->rtc_regmap, max77686->irq,
>> +
>> + ret = regmap_add_irq_chip(*rtc_regmap, max77686->irq,
>> IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
>> - IRQF_SHARED, 0, &max77686_rtc_irq_chip,
>> + IRQF_SHARED, 0, rtc_irq_chip,
>> &max77686->rtc_irq_data);
>> if (ret) {
>> dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret);
>> goto err_del_irqc;
>> }
>>
>> - ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
>> - ARRAY_SIZE(max77686_devs), NULL, 0, NULL);
>> + ret = mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL, 0, NULL);
>> if (ret < 0) {
>> dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
>> goto err_del_rtc_irqc;
>> @@ -320,7 +451,8 @@ err_del_rtc_irqc:
>> err_del_irqc:
>> regmap_del_irq_chip(max77686->irq, max77686->irq_data);
>> err_unregister_i2c:
>> - i2c_unregister_device(max77686->rtc);
>> + if (max77686->type == TYPE_MAX77686)
>> + i2c_unregister_device(max77686->rtc);
>>
>> return ret;
>> }
>> @@ -341,6 +473,7 @@ static int max77686_i2c_remove(struct i2c_client *i2c)
>
> In remove() you should unregister dummy RTC I2C device only on MAX77686
> (77802 does not add it).
>
Yes, I added the check to the probe()'s error path but forgot about the remove()
function. Thanks a lot for pointing this out.
> Best regards,
> Krzysztof
>
>
Best regards,
Javier
More information about the linux-arm-kernel
mailing list