[PATCH 5/5] ARM: DT: STi: Add DT node for MiPHY365x

[Gabriel Fernandez]

Hi Lee,

You missed to mention the target name (stih416) in the title or in the
commit message.

BR
Gabriel


On 30 June 2014 15:01, Lee Jones <lee.jones at linaro.org> wrote:
> The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
> devices. It has 2 ports which it can use for either; both SATA, both
> PCIe or one of each in any configuration.
>
> Acked-by: Mark Rutland <mark.rutland at arm.com>
> Acked-by: Alexandre Torgue <alexandre.torgue at st.com>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  arch/arm/boot/dts/stih416-b2020-revE.dts |  5 +++++
>  arch/arm/boot/dts/stih416-b2020.dts      |  7 +++++++
>  arch/arm/boot/dts/stih416.dtsi           | 21 +++++++++++++++++++++
>  3 files changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
> index ba0fa2c..0e2c870 100644
> --- a/arch/arm/boot/dts/stih416-b2020-revE.dts
> +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
> @@ -31,5 +31,10 @@
>                 ethernet1: dwmac at fef08000 {
>                         snps,reset-gpio = <&PIO0 7>;
>                 };
> +
> +               miphy365x_phy: miphy365x at fe382000 {
> +                       st,pcie-tx-pol-inv;
> +                       st,sata-gen = <3>;
> +               };
>         };
>  };
> diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
> index 4e2df66..6f1145c 100644
> --- a/arch/arm/boot/dts/stih416-b2020.dts
> +++ b/arch/arm/boot/dts/stih416-b2020.dts
> @@ -12,4 +12,11 @@
>  / {
>         model = "STiH416 B2020";
>         compatible = "st,stih416-b2020", "st,stih416";
> +
> +       soc {
> +               miphy365x_phy: miphy365x at fe382000 {
> +                       st,pcie-tx-pol-inv;
> +                       st,sata-gen = <3>;
> +               };
> +       };
>  };
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index 06473c5..6d7aee3 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -9,6 +9,8 @@
>  #include "stih41x.dtsi"
>  #include "stih416-clock.dtsi"
>  #include "stih416-pinctrl.dtsi"
> +
> +#include <dt-bindings/phy/phy-miphy365x.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/reset-controller/stih416-resets.h>
>  / {
> @@ -236,5 +238,24 @@
>                         resets  = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
>                                   <&softreset STIH416_KEYSCAN_SOFTRESET>;
>                 };
> +
> +               miphy365x_phy: miphy365x at fe382000 {
> +                       compatible      = "st,miphy365x-phy";
> +                       st,syscfg       = <&syscfg_rear>;
> +                       #phy-cells      = <2>;
> +                       #address-cells  = <1>;
> +                       #size-cells     = <1>;
> +                       ranges;
> +
> +                       phy_port0: port at fe382000 {
> +                               reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
> +                               reg-names = "sata", "pcie";
> +                       };
> +
> +                       phy_port1: port at fe38a000 {
> +                               reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
> +                               reg-names = "sata", "pcie";
> +                       };
> +               };
>         };
>  };
> --
> 1.8.3.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel