[PATCH v2 1/2] ARM: topology: Use a clock if possible to get the CPU frequency

[Maxime Ripard]

On Mon, Jun 30, 2014 at 05:06:16PM +0200, Vincent Guittot wrote:
> On 30 June 2014 16:58, Maxime Ripard <maxime.ripard at free-electrons.com> wrote:
> > On Mon, Jun 30, 2014 at 04:48:35PM +0200, Vincent Guittot wrote:
> >> On 30 June 2014 16:01, Maxime Ripard <maxime.ripard at free-electrons.com> wrote:
> >> > On Mon, Jun 30, 2014 at 03:27:21PM +0200, Vincent Guittot wrote:
> >> >> >> >> -             rate = of_get_property(cn, "clock-frequency", &len);
> >> >> >> >> -             if (!rate || len != 4) {
> >> >> >> >> -                     pr_err("%s missing clock-frequency property\n",
> >> >> >> >> -                             cn->full_name);
> >> >> >> >> +             clk = of_clk_get(cn, 0);
> >> >> >> >> +             if (!IS_ERR(clk))
> >> >> >> >> +                     rate = clk_get_rate(clk);
> >> >> >>
> >> >> >> We need the max frequency as it will be used to weight the different
> >> >> >> CPUs capacity. How do you ensure that the current clock rate is the
> >> >> >> max one ?
> >> >> >
> >> >> > Hmm, the clock-frequency attribute in the ePAPR is defined at the
> >> >> > current CPU frequency, not the max one.
> >> >>
> >> >> What means current frequency in device tree when DVFS is involved ?
> >> >
> >> > The ePAPR states that clock-frequency is supposed to be "the current
> >> > clock speed of the CPU in Hertz". It's exactly what my patch add.
> >> >
> >> > Now, you're right, DVFS would be an issue here with clock-frequency,
> >> > but this patch actually makes it easier to deal with, since you only
> >> > get a reference to a clock, and you can get its rate at any given
> >> > time.
> >>
> >> and what about using clk_round_rate(clk, ULONG_MAX) ?
> >
> > Well, the clock itself might generate a frequency higher that what the
> > CPU can run at, so I'm not sure it's a valid assumption.
> 
> yes, you're right
> 
> >
> >> We will not be dependent of when we parse DT
> >
> > You lost me there. clk_round_rate and clk_get_rate are available at
> > the same time in the boot process, aren't they?
> 
> yes, but  clk_round_rate(clk, ULONG_MAX) will return the max frequency
> and not the current one. But as you mentioned, it doesn't ensure that
> it's a possible frequency for the core

Is this an Acked-by ?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140703/491ce4a6/attachment.sig>