[PATCH v2 14/14] AT91: PIT: Move the driver to drivers/clocksource

[Maxime Ripard]

Now that we don't depend on anyting in the mach-at91 directory, we can just
move the driver to where it belongs.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/mach-at91/Kconfig                                          | 6 ------
 arch/arm/mach-at91/Makefile                                         | 1 -
 drivers/clocksource/Kconfig                                         | 4 ++++
 drivers/clocksource/Makefile                                        | 1 +
 .../at91sam926x_time.c => drivers/clocksource/timer-atmel-pit.c     | 0
 5 files changed, 5 insertions(+), 7 deletions(-)
 rename arch/arm/mach-at91/at91sam926x_time.c => drivers/clocksource/timer-atmel-pit.c (100%)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a64412a020d3..1cd2a269ebbf 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -36,16 +36,11 @@ config AT91_SAM9G45_RESET
 	bool
 	default !ARCH_AT91X40
 
-config AT91_SAM9_TIME
-	select CLKSRC_OF if OF
-	bool
-
 config HAVE_AT91_SMD
 	bool
 
 config SOC_AT91SAM9
 	bool
-	select AT91_SAM9_TIME
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
@@ -53,7 +48,6 @@ config SOC_AT91SAM9
 
 config SOC_SAMA5
 	bool
-	select AT91_SAM9_TIME
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 78e9cec282f4..1a916ececbfd 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,7 +10,6 @@ obj-		:=
 obj-$(CONFIG_OLD_CLK_AT91)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
-obj-$(CONFIG_AT91_SAM9_TIME)	+= at91sam926x_time.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 065131cbfcc0..3e6fbfe7af5b 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -118,6 +118,10 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	 Use ARM global timer clock source as sched_clock
 
+config ATMEL_PIT
+	select CLKSRC_OF if OF
+	def_bool SOC_AT91SAM9 || SOC_SAMA5
+
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 800b1303c236..98cf44e4b55a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
+obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/drivers/clocksource/timer-atmel-pit.c
similarity index 100%
rename from arch/arm/mach-at91/at91sam926x_time.c
rename to drivers/clocksource/timer-atmel-pit.c
-- 
2.0.0