[PATCH 6/9] ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3

[Hans de Goede]

Hi,

On 07/01/2014 09:21 AM, Chen-Yu Tsai wrote:
> On Tue, Jul 1, 2014 at 3:12 PM, Hans de Goede <hdegoede at redhat.com> wrote:
>> Hi,
>>
>> On 07/01/2014 04:22 AM, Chen-Yu Tsai wrote:
>>> On Tue, Jul 1, 2014 at 5:57 AM, Hans de Goede <hdegoede at redhat.com> wrote:
>>>> From: Zoltan HERPAI <wigyori at uid0.hu>
>>>>
>>>> The LinkSprite pcDuino V3 is an A20 based development board featuring
>>>> arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi
>>>> and 100 Mbit ethernet using an ip101a phy:
>>>>
>>>> http://www.pcduino.com/pcduino-v3/
>>>>
>>>> Signed-off-by: Zoltan HERPAI <wigyori at uid0.hu>
>>>> [hdegoede at redhat.com: Various cleanups, correct led pins]
>>>> [hdegoede at redhat.com: Add axp209, ir and gpio-keys nodes]
>>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>>>
>>>> --
>>>>
>>>> Changes since v2:
>>>>  - update MMC entry to comply with upstream
>>>>  - unify the 4 patches into one
>>>>
>>>> Changes since v1:
>>>>  - fix cosmetic issues
>>>>  - fix i2c entry
>>>>  - remove unnecessary input bindings include
>>>>  - add MMC support
>>>> ---
>>>>  arch/arm/boot/dts/Makefile               |   3 +-
>>>>  arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 173 +++++++++++++++++++++++++++++++
>>>>  2 files changed, 175 insertions(+), 1 deletion(-)
>>>>  create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index ed0de8b..fdc590e 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -380,7 +380,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>>>>         sun7i-a20-cubieboard2.dtb \
>>>>         sun7i-a20-cubietruck.dtb \
>>>>         sun7i-a20-i12-tvbox.dtb \
>>>> -       sun7i-a20-olinuxino-micro.dtb
>>>> +       sun7i-a20-olinuxino-micro.dtb \
>>>> +       sun7i-a20-pcduino3.dtb
>>>
>>> You may need to rebase onto my sun8i ippo-q8h dts patch.
>>>
>>>   https://patchwork.kernel.org/patch/4389951/
>>>
>>> There's a likely conflict in the Makefile here.
>>
>> Has that one already been accepted by Maxime ? I'm fine rebasing patches
>> on top of accepted stuff, but rebasing on pending stuff is not really
>> useful IMHO.
> 
> Maxime replied stating he applied it. See the lower part of the patchwork
> page.
> 
> AFAIK he's accepted my initial sun8i patches and CIR DT patches this cycle.

Ok, I'm not seeing anything for 3.17 here though:
https://github.com/mripard/linux/

Maxime, can you push a sunxi/dt-for-3.17 with what you currently have there?

Then I'll rebase this series on top, fix the commit msg thingie Chen pointed
out and send a v2.

Regards,

Hans