[PATCH v3 3/5] spi: sunxi: Add Allwinner A31 SPI controller driver

[Mark Brown]

On Fri, Jan 31, 2014 at 11:55:50AM +0100, Maxime Ripard wrote:

> +	master = devm_spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
> +	if (!master) {
> +		dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
> +		return -ENOMEM;
> +	}

This now depends on your other series which as I said doesn't look like
the best approach.

> +	pm_runtime_enable(&pdev->dev);
> +	if (!pm_runtime_enabled(&pdev->dev)) {
> +		ret = sun6i_spi_runtime_resume(&pdev->dev);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Couldn't resume the device\n");
> +			return ret;
> +		}
> +	}

No, as discussed don't do this - notice how other drivers aren't written
this way either.  Like I said leave the device powered on startup and
then let it be idled by runtime PM.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140131/768cbcd7/attachment.sig>