[PATCH V3 6/8] SPEAr13xx: Fixup: Move SPEAr1340 SATA platform code to phy driver
Mohit Kumar
mohit.kumar at st.com
Thu Jan 30 05:48:48 EST 2014
From: Pratyush Anand <pratyush.anand at st.com>
ahci driver needs some platform specific functions which are called at
init, exit, suspend and resume conditions. Till now these functions were
present in a platform driver with a fixme notes.
Similar functions modifying same set of registers will also be needed in
case of PCIe phy init/exit.
So move all these SATA platform code to a proper phy driver.
Same phy driver will be used to add PCIe init/exit routine.
Signed-off-by: Pratyush Anand <pratyush.anand at st.com>
Tested-by: Mohit Kumar <mohit.kumar at st.com>
Cc: Viresh Kumar <viresh.linux at gmail.com>
Cc: Tejun Heo <tj at kernel.org>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Kishon Vijay Abraham I <kishon at ti.com>
Cc: spear-devel at list.st.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: devicetree at vger.kernel.org
Cc: linux-ide at vger.kernel.org
---
.../devicetree/bindings/phy/spear13xx-miphy.txt | 8 +
arch/arm/boot/dts/spear1310-evb.dts | 4 +
arch/arm/boot/dts/spear1310.dtsi | 36 +++-
arch/arm/boot/dts/spear1340-evb.dts | 4 +
arch/arm/boot/dts/spear1340.dtsi | 12 +-
arch/arm/boot/dts/spear13xx.dtsi | 5 +
arch/arm/mach-spear/Kconfig | 2 +
arch/arm/mach-spear/spear1340.c | 127 +--------
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-spear13xx-sata-pcie.c | 305 ++++++++++++++++++++
11 files changed, 380 insertions(+), 130 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/spear13xx-miphy.txt
create mode 100644 drivers/phy/phy-spear13xx-sata-pcie.c
diff --git a/Documentation/devicetree/bindings/phy/spear13xx-miphy.txt b/Documentation/devicetree/bindings/phy/spear13xx-miphy.txt
new file mode 100644
index 0000000..208b37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/spear13xx-miphy.txt
@@ -0,0 +1,8 @@
+Required properties:
+- compatible : should be "st,spear1340-sata-pcie-phy".
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 2.
+ - 1st arg: phandle to the phy node.
+ - 2nd arg: 0 if phy (in 1st arg) is to be used for sata else 1.
+ - 3rd arg: Instance id of the phy (in 1st arg).
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index b56a801..d42c84b 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -106,6 +106,10 @@
status = "okay";
};
+ miphy at eb800000 {
+ status = "okay";
+ };
+
cf at b2800000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 122ae94..0d62418 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -29,24 +29,54 @@
#gpio-cells = <2>;
};
- ahci at b1000000 {
+ miphy0: miphy at eb800000 {
+ compatible = "st,spear1340-sata-pcie-phy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <2>;
+ status = "disabled";
+ };
+
+ miphy1: miphy at eb804000 {
+ compatible = "st,spear1340-sata-pcie-phy";
+ reg = <0xeb804000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <2>;
+ status = "disabled";
+ };
+
+ miphy2: miphy at eb808000 {
+ compatible = "st,spear1340-sata-pcie-phy";
+ reg = <0xeb808000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <2>;
+ status = "disabled";
+ };
+
+ ahci0: ahci at b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>;
+ phys = <&miphy0 0 0>;
+ phy-names = "ahci-phy";
status = "disabled";
};
- ahci at b1800000 {
+ ahci1: ahci at b1800000 {
compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>;
+ phys = <&miphy1 0 1>;
+ phy-names = "ahci-phy";
status = "disabled";
};
- ahci at b4000000 {
+ ahci2: ahci at b4000000 {
compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>;
+ phys = <&miphy2 0 2>;
+ phy-names = "ahci-phy";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index d6c30ae..b23e05e 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -122,6 +122,10 @@
status = "okay";
};
+ miphy at eb800000 {
+ status = "okay";
+ };
+
dma at ea800000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 54d128d..c6b0e34 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -31,10 +31,20 @@
status = "disabled";
};
- ahci at b1000000 {
+ miphy0: miphy at eb800000 {
+ compatible = "st,spear1340-sata-pcie-phy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <2>;
+ status = "disabled";
+ };
+
+ ahci0: ahci at b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 72 0x4>;
+ phys = <&miphy0 0 0>;
+ phy-names = "ahci-phy";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index 4382547..3a72508 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -220,6 +220,11 @@
0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
+ misc: syscon at e0700000 {
+ compatible = "st,spear1340-misc", "syscon";
+ reg = <0xe0700000 0x1000>;
+ };
+
gpio0: gpio at e0600000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xe0600000 0x1000>;
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ac1710e..44d8543 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -26,6 +26,8 @@ config ARCH_SPEAR13XX
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select USE_OF
+ select MFD_SYSCON
+ select PHY_SPEAR13XX_SATA_PCIE
help
Supports for ARM's SPEAR13XX family
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 3fb6834..8e27093 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -11,138 +11,13 @@
* warranty of any kind, whether express or implied.
*/
-#define pr_fmt(fmt) "SPEAr1340: " fmt
-
-#include <linux/ahci_platform.h>
-#include <linux/amba/serial.h>
-#include <linux/delay.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include "generic.h"
-#include <mach/spear.h>
-
-/* FIXME: Move SATA PHY code into a standalone driver */
-
-/* Base addresses */
-#define SPEAR1340_SATA_BASE UL(0xB1000000)
-
-/* Power Management Registers */
-#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
-#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
-#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
-
-#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
-#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
-#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
-
-/* PCIE - SATA configuration registers */
-#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
- /* PCIE CFG MASks */
- #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
- #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
- #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
- #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
- #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
- #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
- #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
- #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
- #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
- #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
- #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
- #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
- SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
- SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
- SPEAR1340_PCIE_CFG_POWERUP_RESET | \
- SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
- #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
- SPEAR1340_SATA_CFG_PM_CLK_EN | \
- SPEAR1340_SATA_CFG_POWERUP_RESET | \
- SPEAR1340_SATA_CFG_RX_CLK_EN | \
- SPEAR1340_SATA_CFG_TX_CLK_EN)
-
-#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
- #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
- #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
- #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_CLK_REF_DIV2 | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
- (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-
-/* SATA device registration */
-static int sata_miphy_init(struct device *dev, void __iomem *addr)
-{
- writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
- writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
- SPEAR1340_PCIE_MIPHY_CFG);
- /* Switch on sata power domain */
- writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
- msleep(20);
- /* Disable PCIE SATA Controller reset */
- writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
- SPEAR1340_PERIP1_SW_RST);
- msleep(20);
-
- return 0;
-}
-
-void sata_miphy_exit(struct device *dev)
-{
- writel(0, SPEAR1340_PCIE_SATA_CFG);
- writel(0, SPEAR1340_PCIE_MIPHY_CFG);
-
- /* Enable PCIE SATA Controller reset */
- writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
- SPEAR1340_PERIP1_SW_RST);
- msleep(20);
- /* Switch off sata power domain */
- writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
- msleep(20);
-}
-
-int sata_suspend(struct device *dev)
-{
- if (dev->power.power_state.event == PM_EVENT_FREEZE)
- return 0;
-
- sata_miphy_exit(dev);
-
- return 0;
-}
-
-int sata_resume(struct device *dev)
-{
- if (dev->power.power_state.event == PM_EVENT_THAW)
- return 0;
-
- return sata_miphy_init(dev, NULL);
-}
-
-static struct ahci_platform_data sata_pdata = {
- .init = sata_miphy_init,
- .exit = sata_miphy_exit,
- .suspend = sata_suspend,
- .resume = sata_resume,
-};
-
-/* Add SPEAr1340 auxdata to pass platform data */
-static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
- &sata_pdata),
- {}
-};
static void __init spear1340_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- spear1340_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const spear1340_dt_board_compat[] = {
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a344f3d..ae34fb8 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -51,4 +51,10 @@ config PHY_EXYNOS_DP_VIDEO
help
Support for Display Port PHY found on Samsung EXYNOS SoCs.
+config PHY_SPEAR13XX_SATA_PCIE
+ tristate "SPEAr13xx SoC SATA PCIe PHY driver"
+ help
+ Support for SATA and PCIe PHY for SPEAr13xx SoC
+ select GENERIC_PHY
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d0caae9..8941283 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
+obj-$(CONFIG_PHY_SPEAR13XX_SATA_PCIE) += phy-spear13xx-sata-pcie.o
diff --git a/drivers/phy/phy-spear13xx-sata-pcie.c b/drivers/phy/phy-spear13xx-sata-pcie.c
new file mode 100644
index 0000000..6adfa64
--- /dev/null
+++ b/drivers/phy/phy-spear13xx-sata-pcie.c
@@ -0,0 +1,305 @@
+/*
+ * ST SPEAr13xx SATA PCIe PHY driver
+ *
+ * Copyright (C) 2014 ST Microelectronics
+ * Pratyush Anand <pratyush.anand at st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+/* SPEAr1340 Registers */
+/* Power Management Registers */
+#define SPEAR1340_PCM_CFG 0x100
+ #define SPEAR1340_PCM_CFG_SATA_POWER_EN 0x800
+#define SPEAR1340_PCM_WKUP_CFG 0x104
+#define SPEAR1340_SWITCH_CTR 0x108
+
+#define SPEAR1340_PERIP1_SW_RST 0x318
+ #define SPEAR1340_PERIP1_SW_RST_SATA 0x1000
+#define SPEAR1340_PERIP2_SW_RST 0x31C
+#define SPEAR1340_PERIP3_SW_RST 0x320
+
+/* PCIE - SATA configuration registers */
+#define SPEAR1340_PCIE_SATA_CFG 0x424
+ /* PCIE CFG MASks */
+ #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
+ #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
+ #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
+ #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
+ #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
+ #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
+ #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
+ #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
+ #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
+ #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
+ #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F
+ #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
+ SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
+ SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
+ SPEAR1340_PCIE_CFG_POWERUP_RESET | \
+ SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
+ #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
+ SPEAR1340_SATA_CFG_PM_CLK_EN | \
+ SPEAR1340_SATA_CFG_POWERUP_RESET | \
+ SPEAR1340_SATA_CFG_RX_CLK_EN | \
+ SPEAR1340_SATA_CFG_TX_CLK_EN)
+
+#define SPEAR1340_PCIE_MIPHY_CFG 0x428
+ #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
+ #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
+ #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
+ #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_CLK_REF_DIV2 | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
+ (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
+ #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
+ (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
+ SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
+
+enum phy_mode {
+ SATA,
+ PCIE
+};
+
+struct spear13xx_phy_priv {
+ /* regmap for SPEAr13xx misc registers */
+ struct regmap *misc;
+ /* phy struct pointer */
+ struct phy *phy;
+ /* phy mode: 0 for SATA and 1 for PCIe */
+ enum phy_mode mode;
+ /* instance id of this phy */
+ u32 id;
+};
+
+static int spear1340_sata_miphy_init(struct spear13xx_phy_priv *phypriv)
+{
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, SPEAR1340_SATA_CFG_VAL);
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK,
+ SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK);
+ /* Switch on sata power domain */
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCM_CFG,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN);
+ msleep(20);
+ /* Disable PCIE SATA Controller reset */
+ regmap_update_bits(phypriv->misc, SPEAR1340_PERIP1_SW_RST,
+ SPEAR1340_PERIP1_SW_RST_SATA, 0);
+ msleep(20);
+
+ return 0;
+}
+
+static int spear1340_sata_miphy_exit(struct spear13xx_phy_priv *phypriv)
+{
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCIE_SATA_CFG,
+ SPEAR1340_PCIE_SATA_CFG_MASK, 0);
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCIE_MIPHY_CFG,
+ SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
+
+ /* Enable PCIE SATA Controller reset */
+ regmap_update_bits(phypriv->misc, SPEAR1340_PERIP1_SW_RST,
+ SPEAR1340_PERIP1_SW_RST_SATA,
+ SPEAR1340_PERIP1_SW_RST_SATA);
+ msleep(20);
+ /* Switch off sata power domain */
+ regmap_update_bits(phypriv->misc, SPEAR1340_PCM_CFG,
+ SPEAR1340_PCM_CFG_SATA_POWER_EN, 0);
+ msleep(20);
+
+ return 0;
+}
+
+static int sata_miphy_init(struct spear13xx_phy_priv *phypriv)
+{
+ if (of_machine_is_compatible("st,spear1340"))
+ return spear1340_sata_miphy_init(phypriv);
+ else
+ return -EINVAL;
+}
+
+static int sata_miphy_exit(struct spear13xx_phy_priv *phypriv)
+{
+ if (of_machine_is_compatible("st,spear1340"))
+ return spear1340_sata_miphy_exit(phypriv);
+ else
+ return -EINVAL;
+}
+
+static int sata_miphy_suspend(struct spear13xx_phy_priv *phypriv)
+{
+ return sata_miphy_exit(phypriv);
+}
+
+static int sata_miphy_resume(struct spear13xx_phy_priv *phypriv)
+{
+ return sata_miphy_init(phypriv);
+}
+
+static int miphy_init(struct phy *phy)
+{
+ struct spear13xx_phy_priv *phypriv = phy_get_drvdata(phy);
+
+ switch (phypriv->mode) {
+ case SATA:
+ return sata_miphy_init(phypriv);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int miphy_exit(struct phy *phy)
+{
+ struct spear13xx_phy_priv *phypriv = phy_get_drvdata(phy);
+
+ switch (phypriv->mode) {
+ case SATA:
+ return sata_miphy_exit(phypriv);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int miphy_power_off(struct phy *phy)
+{
+ struct spear13xx_phy_priv *phypriv = phy_get_drvdata(phy);
+ struct device *dev = &phy->dev;
+
+ if (dev->power.power_state.event == PM_EVENT_FREEZE)
+ return 0;
+
+ switch (phypriv->mode) {
+ case SATA:
+ return sata_miphy_suspend(phypriv);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int miphy_power_on(struct phy *phy)
+{
+ struct spear13xx_phy_priv *phypriv = phy_get_drvdata(phy);
+ struct device *dev = &phy->dev;
+
+ if (dev->power.power_state.event == PM_EVENT_THAW)
+ return 0;
+
+ switch (phypriv->mode) {
+ case SATA:
+ return sata_miphy_resume(phypriv);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct of_device_id spear13xx_phy_of_match[] = {
+ { .compatible = "st,spear1340-sata-pcie-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, spear13xx_phy_of_match);
+
+static struct phy_ops spear13xx_sata_pcie_phy_ops = {
+ .init = miphy_init,
+ .exit = miphy_exit,
+ .power_off = miphy_power_off,
+ .power_on = miphy_power_on,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *spear13xx_sata_pcie_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct spear13xx_phy_priv *phypriv = dev_get_drvdata(dev);
+
+ if (args->args_count < 2) {
+ dev_err(dev, "DT did not pass correct no of args\n");
+ return NULL;
+ }
+
+ phypriv->mode = args->args[0];
+ phypriv->id = args->args[1];
+
+ return phypriv->phy;
+}
+
+static int __init spear13xx_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct spear13xx_phy_priv *phypriv;
+ struct phy_provider *phy_provider;
+
+ phypriv = devm_kzalloc(dev, sizeof(*phypriv), GFP_KERNEL);
+ if (!phypriv) {
+ dev_err(dev, "can't alloc sata pcie private date memory\n");
+ return -ENOMEM;
+ }
+
+ phypriv->misc =
+ syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
+ if (IS_ERR(phypriv->misc)) {
+ dev_err(dev, "failed to find SPEAr13xx misc regmap\n");
+ return PTR_ERR(phypriv->misc);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ spear13xx_sata_pcie_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ phypriv->phy = devm_phy_create(dev, &spear13xx_sata_pcie_phy_ops, NULL);
+ if (IS_ERR(phypriv->phy)) {
+ dev_err(dev, "failed to create SATA PCIe PHY\n");
+ return PTR_ERR(phypriv->phy);
+ }
+
+ dev_set_drvdata(dev, phypriv);
+ phy_set_drvdata(phypriv->phy, phypriv);
+
+ return 0;
+}
+
+static int __exit spear13xx_phy_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver spear13xx_phy_driver = {
+ .remove = __exit_p(spear13xx_phy_remove),
+ .driver = {
+ .name = "spear13xx-sata_pcie-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(spear13xx_phy_of_match),
+ },
+};
+
+static int __init spear13xx_phy_init(void)
+{
+
+ return platform_driver_probe(&spear13xx_phy_driver,
+ spear13xx_phy_probe);
+}
+subsys_initcall(spear13xx_phy_init);
+
+MODULE_DESCRIPTION("ST SPEAr13xx SATA PCIe PHY driver");
+MODULE_AUTHOR("Pratyush Anand <pratyush.anand at st.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.0.1
More information about the linux-arm-kernel
mailing list