[PATCH v5 17/23] drm/i2c: tda998x: set the PLL division factor in range 0..3

[Joe Perches]

On Sat, 2014-01-25 at 18:14 +0100, Jean-Francois Moine wrote:
> The predivider division factor of the register PLL_SERIAL_2 is in the
> range 0..3, the value 0 being used for a division by 1.

trivia:

> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
[]
> @@ -886,6 +886,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
>  	}
>  
>  	div = 148500 / mode->clock;
> +	if (div != 0) {
> +		div--;
> +		if (div > 3)
> +			div = 3;
> +	}

perhaps
	clamp(div, 1, 4)
	div--;