[PATCH v5 07/20] watchdog: orion: Handle the interrupt so it's properly acked

[Ezequiel Garcia]

DT-enabled plaforms, where the irqchip driver for the brigde interrupt
controller is available, can handle the watchdog IRQ properly. Therefore,
request the interrupt and add a dummy handler that merely calls panic().

This is done in order to have an initial 'ack' of the interruption,
which clears the watchdog state.

Furthermore, since some platforms don't have such IRQ, this commit
makes the interrupt specification optional.

Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
Depends on the following irqchip-orion fix (not yet merged):
https://lkml.org/lkml/2014/1/23/594

 .../devicetree/bindings/watchdog/marvel.txt        |  2 ++
 drivers/watchdog/orion_wdt.c                       | 24 +++++++++++++++++++++-
 2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 5dc8d30..0731fbd 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -7,6 +7,7 @@ Required Properties:
 
 Optional properties:
 
+- interrupts	: Contains the IRQ for watchdog expiration
 - timeout-sec	: Contains the watchdog timeout in seconds
 
 Example:
@@ -14,6 +15,7 @@ Example:
 	wdt at 20300 {
 		compatible = "marvell,orion-wdt";
 		reg = <0x20300 0x28>;
+		interrupts = <3>;
 		timeout-sec = <10>;
 		status = "okay";
 	};
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 2dbeee9..7c5e94e 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -109,10 +110,16 @@ static struct watchdog_device orion_wdt = {
 	.min_timeout = 1,
 };
 
+static irqreturn_t orion_wdt_irq(int irq, void *devid)
+{
+	panic("Watchdog Timeout");
+	return IRQ_HANDLED;
+}
+
 static int orion_wdt_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret;
+	int ret, irq;
 
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
@@ -145,6 +152,21 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	/* Let's make sure the watchdog is fully stopped */
 	orion_wdt_stop(&orion_wdt);
 
+	/* The IRQ request must be done only after the watchdog is disabled */
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		/*
+		 * Not all supported platforms specify an interrupt for the
+		 * watchdog, so let's make it optional.
+		 */
+		ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0,
+				       pdev->name, &orion_wdt);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to request IRQ\n");
+			goto disable_clk;
+		}
+	}
+
 	watchdog_set_nowayout(&orion_wdt, nowayout);
 	ret = watchdog_register_device(&orion_wdt);
 	if (ret)
-- 
1.8.1.5