[PATCH V7 0/2] Exynos5250 SATA Support
Yuvaraj Kumar C D
yuvaraj.cd at gmail.com
Mon Jan 27 09:19:24 EST 2014
This patch series enable the SATA support on Exynos5250 based boards.
It incorporates the generic phy framework to deal with sata phy.
This patch depends on the below patches
[1]. drivers: phy: add generic PHY framework
by Kishon Vijay Abraham I<kishon at ti.com>
[2]. ata: ahci_platform: Manage SATA PHY
by Roger Quadros <rogerq at ti.com>
[3].ARM: dts: Add pmu sysreg node to exynos5250 and
exynos5420 dtsi files
by Leela Krishna Amudala <l.krishna at samsung.com>
[4]. i2c: s3c2410 : Add polling mode support
by Vasanth Ananthan <vasanth.a at samsung.com>
Changes from V6:
1.Removed phy-exynos5250-sata-i2c.c,as it is not required
after moving to of_find_i2c_device_by_node().
2.Changed struct __iomem pmureg tp struct regmap pmureg.
3.Changed the wait_for_reg_status() to return 0 or -EFAULT.
Changes from V5:
1.Rebased on latest generic PHY framework for-next tree.
2.Minor nits such as indentations.
Changes from V4:
1.Made Exynos5250 SATA PHY driver by default selects
CONFIG_I2C and CONFIG_I2C_S3C2410, as SATA PHY driver
depends on I2C.
2.Used the new phandle "sata_phy_i2c" in the DT entry.
3.struct i2c_driver sataphy_i2c_driver made static which
was earlier global type.
Changes from V3:
1.Moved the devicetree binding documentation
from /bindings/ata/ to bindings/phy/ .
2.Moved devm_phy_create call before to
the devm_phy_provider_register.
Changes from V2:
1.Removed of_match_table
2.Moved to syscon interface for PMU handling.
Changes from V1:
1. Dropped the patch
ahci: exynos: add ahci sata support on Exynos platform
2.Adapt to latest generic PHY framework available in
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git next
Yuvaraj Kumar C D (2):
PHY: Exynos: Add Exynos5250 SATA PHY driver
ARM: dts: Enable ahci sata and sata phy
.../devicetree/bindings/ata/exynos-sata-phy.txt | 14 --
.../devicetree/bindings/ata/exynos-sata.txt | 25 +-
.../devicetree/bindings/phy/samsung-phy.txt | 36 +++
arch/arm/boot/dts/exynos5250-arndale.dts | 11 +
arch/arm/boot/dts/exynos5250-smdk5250.dts | 8 +-
arch/arm/boot/dts/exynos5250.dtsi | 17 +-
drivers/phy/Kconfig | 13 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos5250-sata.c | 244 ++++++++++++++++++++
9 files changed, 336 insertions(+), 33 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
create mode 100644 drivers/phy/phy-exynos5250-sata.c
--
1.7.9.5
More information about the linux-arm-kernel
mailing list