[PATCH 09/11] pinctrl: mvebu: dove: use remapped mpp4 register

Sebastian Hesselbarth sebastian.hesselbarth at gmail.com
Sat Jan 25 13:34:14 EST 2014


Now that we have an ioremapped mpp4 register, get rid of hardcoded
physical addresses. While at it, also remove DOVE_ prefix from those
macros.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/pinctrl/mvebu/pinctrl-dove.c | 54 +++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index 79106e7ecdd0..0c7616e086b2 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -46,18 +46,20 @@
 #define  DOVE_AU1_SPDIFO_GPIO_EN	BIT(1)
 #define  DOVE_NAND_GPIO_EN		BIT(0)
 #define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
-#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
-#define  DOVE_SPI_GPIO_SEL		BIT(5)
-#define  DOVE_UART1_GPIO_SEL		BIT(4)
-#define  DOVE_AU1_GPIO_SEL		BIT(3)
-#define  DOVE_CAM_GPIO_SEL		BIT(2)
-#define  DOVE_SD1_GPIO_SEL		BIT(1)
-#define  DOVE_SD0_GPIO_SEL		BIT(0)
 
 /* MPP Base registers */
 #define PMU_MPP_GENERAL_CTRL	0x10
 #define  AU0_AC97_SEL		BIT(16)
 
+/* MPP Control 4 register */
+#define MPP_CTRL4		0x40
+#define  SPI_GPIO_SEL		BIT(5)
+#define  UART1_GPIO_SEL		BIT(4)
+#define  AU1_GPIO_SEL		BIT(3)
+#define  CAM_GPIO_SEL		BIT(2)
+#define  SD1_GPIO_SEL		BIT(1)
+#define  SD0_GPIO_SEL		BIT(0)
+
 #define MPPS_PER_REG	8
 #define MPP_BITS	4
 #define MPP_MASK	0xf
@@ -117,24 +119,24 @@ static int dove_pmu_mpp_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
 			      unsigned long *config)
 {
-	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mpp4 = readl(mpp4_base + MPP_CTRL4);
 	unsigned long mask;
 
 	switch (ctrl->pid) {
 	case 24: /* mpp_camera */
-		mask = DOVE_CAM_GPIO_SEL;
+		mask = CAM_GPIO_SEL;
 		break;
 	case 40: /* mpp_sdio0 */
-		mask = DOVE_SD0_GPIO_SEL;
+		mask = SD0_GPIO_SEL;
 		break;
 	case 46: /* mpp_sdio1 */
-		mask = DOVE_SD1_GPIO_SEL;
+		mask = SD1_GPIO_SEL;
 		break;
 	case 58: /* mpp_spi0 */
-		mask = DOVE_SPI_GPIO_SEL;
+		mask = SPI_GPIO_SEL;
 		break;
 	case 62: /* mpp_uart1 */
-		mask = DOVE_UART1_GPIO_SEL;
+		mask = UART1_GPIO_SEL;
 		break;
 	default:
 		return -EINVAL;
@@ -148,24 +150,24 @@ static int dove_mpp4_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
 static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 			      unsigned long config)
 {
-	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mpp4 = readl(mpp4_base + MPP_CTRL4);
 	unsigned long mask;
 
 	switch (ctrl->pid) {
 	case 24: /* mpp_camera */
-		mask = DOVE_CAM_GPIO_SEL;
+		mask = CAM_GPIO_SEL;
 		break;
 	case 40: /* mpp_sdio0 */
-		mask = DOVE_SD0_GPIO_SEL;
+		mask = SD0_GPIO_SEL;
 		break;
 	case 46: /* mpp_sdio1 */
-		mask = DOVE_SD1_GPIO_SEL;
+		mask = SD1_GPIO_SEL;
 		break;
 	case 58: /* mpp_spi0 */
-		mask = DOVE_SPI_GPIO_SEL;
+		mask = SPI_GPIO_SEL;
 		break;
 	case 62: /* mpp_uart1 */
-		mask = DOVE_UART1_GPIO_SEL;
+		mask = UART1_GPIO_SEL;
 		break;
 	default:
 		return -EINVAL;
@@ -175,7 +177,7 @@ static int dove_mpp4_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 	if (config)
 		mpp4 |= mask;
 
-	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(mpp4, mpp4_base + MPP_CTRL4);
 
 	return 0;
 }
@@ -230,13 +232,13 @@ static int dove_audio0_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
 				unsigned long *config)
 {
-	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mpp4 = readl(mpp4_base + MPP_CTRL4);
 	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
 	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
 	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
 
 	*config = 0;
-	if (mpp4 & DOVE_AU1_GPIO_SEL)
+	if (mpp4 & AU1_GPIO_SEL)
 		*config |= BIT(3);
 	if (sspc1 & DOVE_SSP_ON_AU1)
 		*config |= BIT(2);
@@ -257,7 +259,7 @@ static int dove_audio1_ctrl_get(struct mvebu_mpp_ctrl *ctrl,
 static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 				unsigned long config)
 {
-	unsigned long mpp4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	unsigned long mpp4 = readl(mpp4_base + MPP_CTRL4);
 	unsigned long sspc1 = readl(DOVE_SSP_CTRL_STATUS_1);
 	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
 	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
@@ -268,7 +270,7 @@ static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 	gcfg2 &= ~DOVE_TWSI_OPTION3_GPIO;
 	gmpp &= ~DOVE_AU1_SPDIFO_GPIO_EN;
 	sspc1 &= ~DOVE_SSP_ON_AU1;
-	mpp4 &= ~DOVE_AU1_GPIO_SEL;
+	mpp4 &= ~AU1_GPIO_SEL;
 
 	if (config & BIT(0))
 		gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
@@ -277,9 +279,9 @@ static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 	if (config & BIT(2))
 		sspc1 |= DOVE_SSP_ON_AU1;
 	if (config & BIT(3))
-		mpp4 |= DOVE_AU1_GPIO_SEL;
+		mpp4 |= AU1_GPIO_SEL;
 
-	writel(mpp4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(mpp4, mpp4_base + MPP_CTRL4);
 	writel(sspc1, DOVE_SSP_CTRL_STATUS_1);
 	writel(gmpp, DOVE_MPP_GENERAL_VIRT_BASE);
 	writel(gcfg2, DOVE_GLOBAL_CONFIG_2);
-- 
1.8.5.2




More information about the linux-arm-kernel mailing list