[PATCH V2 6/8] SPEAr13xx: Fix static mapping table
Pratyush Anand
pratyush.anand at st.com
Fri Jan 24 00:27:50 EST 2014
On Fri, Jan 24, 2014 at 01:07:38PM +0800, Viresh Kumar wrote:
> On Thu, Jan 23, 2014 at 4:02 PM, Mohit Kumar <mohit.kumar at st.com> wrote:
> > From: Pratyush Anand <pratyush.anand at st.com>
> >
> > SPEAr13xx was using virtual address space 0xFE000000 to map physical address
> > space 0xB3000000. pci_remap_io uses 0xFEE00000 as virtual address. So
> > change 0xFE000000 to 0xF9000000.
> >
> > Signed-off-by: Pratyush Anand <pratyush.anand at st.com>
> > Tested-by: Mohit Kumar <mohit.kumar at st.com>
> > Cc: Viresh Kumar <viresh.linux at gmail.com>
> > Cc: spear-devel at list.st.com
> > Cc: linux-arm-kernel at lists.infradead.org
> > Cc: Arnd Bergmann <arnd at arndb.de>
> > ---
> > arch/arm/mach-spear/include/mach/spear.h | 4 ++--
> > arch/arm/mach-spear/spear13xx.c | 2 +-
> > 2 files changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
> > index 5cdc53d..f2d6a01 100644
> > --- a/arch/arm/mach-spear/include/mach/spear.h
> > +++ b/arch/arm/mach-spear/include/mach/spear.h
> > @@ -52,10 +52,10 @@
> > #ifdef CONFIG_ARCH_SPEAR13XX
> >
> > #define PERIP_GRP2_BASE UL(0xB3000000)
> > -#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000)
> > +#define VA_PERIP_GRP2_BASE IOMEM(0xF9000000)
> > #define MCIF_SDHCI_BASE UL(0xB3000000)
> > #define SYSRAM0_BASE UL(0xB3800000)
> > -#define VA_SYSRAM0_BASE IOMEM(0xFE800000)
> > +#define VA_SYSRAM0_BASE IOMEM(0xF9800000)
> > #define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
> >
> > #define PERIP_GRP1_BASE UL(0xE0000000)
> > diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
> > index 7aa6e8c..20ce885 100644
> > --- a/arch/arm/mach-spear/spear13xx.c
> > +++ b/arch/arm/mach-spear/spear13xx.c
> > @@ -52,10 +52,10 @@ void __init spear13xx_l2x0_init(void)
> > /*
> > * Following will create 16MB static virtual/physical mappings
> > * PHYSICAL VIRTUAL
> > - * 0xB3000000 0xFE000000
> > * 0xE0000000 0xFD000000
> > * 0xEC000000 0xFC000000
> > * 0xED000000 0xFB000000
> > + * 0xB3000000 0xF9000000
>
>
> Why have you moved this to bottom of list? It was probably kept
> in increasing order and so please keep the same.
Oh,yes..ll be corrected in v3 of series.
>
> Other than that:
>
> Acked-by: Viresh Kumar <viresh.kumar at linaro.org>
Thanks.
Regards
Pratyush
More information about the linux-arm-kernel
mailing list