[PATCH 1/2] PWM: let of_xlate handlers check args count

[Russell King - ARM Linux]

On Thu, Jan 23, 2014 at 12:04:44PM +0100, Sascha Hauer wrote:
> On Thu, Jan 23, 2014 at 11:56:32AM +0100, Lothar Waßmann wrote:
> > Hi,
> > 
> > Sascha Hauer wrote:
> > > of_pwm_n_cells for the of_xlate handler is stored in struct pwm_chip,
> > > but it is only ever used by the of_xlate handler itsel. Remove
> > > of_pwm_n_cells from struct pwm_chip and let the handler do the argument
> > > count checking to simplify the code.
> > > 
> > This still does not make the PWM_POLARITY flag in the pwms node
> > optional as was the goal because of_parse_phandle_with_args() requires
> > at least #pwm-cells arguments in the node.
> > 
> > So, with a DT configuration like:
> > pwm0: pwm at 0 {
> > 	#pwm-cells = <3>;
> > };
> > backlight {
> > 	pwms = <&pwm0 0 100000>;
> > };
> 
> We misunderstood each other. My goal was to allow the driver to also
> work with old devicetrees which specify #pwm-cells = <2>, not to allow
> inconsistent devicetrees like the snippet above.

In which case, the patch I've posted seems to do that job too... I'm
just about to test out the three-cell version.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".