[PATCH] serial: vt8500: Add missing binding document for arch-vt8500 serial driver.

Rob Herring robherring2 at gmail.com
Thu Jan 23 10:16:57 EST 2014


On Thu, Jan 23, 2014 at 12:30 AM, Tony Prisk <linux at prisktech.co.nz> wrote:
> The binding document for the vt8500/wm8xxx SoC UART driver is missing.
> This patch adds the binding document.
>
> Signed-off-by: Tony Prisk <linux at prisktech.co.nz>
> ---

Applied. Thanks.

Rob

>  .../devicetree/bindings/serial/vt8500-uart.txt     |   26 ++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/vt8500-uart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
> new file mode 100644
> index 0000000..795c393
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
> @@ -0,0 +1,26 @@
> +* VIA VT8500 and WonderMedia WM8xxx UART Controller
> +
> +Required properties:
> +- compatible: should be "via,vt8500-uart"
> +
> +- reg: base physical address of the controller and length of memory mapped
> +       region.
> +
> +- interrupts: hardware interrupt number
> +
> +- clocks: shall be the input parent clock phandle for the clock. This should
> +       be the 24Mhz reference clock.
> +
> +Aliases may be defined to ensure the correct ordering of the uarts.
> +
> +Example:
> +       aliases {
> +               serial0 = &uart0;
> +       };
> +
> +       uart0: serial at d8200000 {
> +               compatible = "via,vt8500-uart";
> +               reg = <0xd8200000 0x1040>;
> +               interrupts = <32>;
> +               clocks = <&clkuart0>;
> +       };
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the linux-arm-kernel mailing list