[PATCH v10] clk: add MOXA ART SoCs clock driver

[Jonas Jensen]

MOXA ART SoCs allow to determine PLL output and APB frequencies
by reading registers holding multiplier and divisor information.

Add a clock driver for this SoC.

Signed-off-by: Jonas Jensen <jonas.jensen at gmail.com>
---

Notes:
    Thanks for the reply Sudeep, changes are in v10.
    
    Changes since v9:
    
    1. rebase drivers/clk/Makefile to next-20140121
    2. remove unnecessary switch
    3. use a more elaborate commit message
    
    Applies to next-20140121

 .../bindings/clock/moxa,moxart-clock.txt           | 48 +++++++++++
 drivers/clk/Makefile                               |  1 +
 drivers/clk/clk-moxart.c                           | 99 ++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
 create mode 100644 drivers/clk/clk-moxart.c

diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 0000000..242e3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle to parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle to parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll at 98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb at 98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 58b2d72..24361bf 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_EFM32)	+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_MOXART)	+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_HI3xxx)	+= hisilicon/
diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
new file mode 100644
index 0000000..7021748
--- /dev/null
+++ b/drivers/clk/clk-moxart.c
@@ -0,0 +1,99 @@
+/*
+ * MOXA ART SoCs clock driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen at gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/clkdev.h>
+
+void __init moxart_of_pll_clk_init(struct device_node *node)
+{
+	static void __iomem *base;
+	struct clk *clk, *ref_clk;
+	unsigned long rate;
+	unsigned int mul;
+	const char *name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &name);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return;
+	}
+
+	mul = readl(base + 0x30) >> 3 & 0x3f;
+	iounmap(base);
+
+	ref_clk = of_clk_get(node, 0);
+	if (IS_ERR(ref_clk)) {
+		pr_err("%s: of_clk_get failed\n", node->full_name);
+		return;
+	}
+
+	rate = mul * clk_get_rate(ref_clk);
+
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register_fixed_rate failed\n", node->full_name);
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, name);
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",
+	       moxart_of_pll_clk_init);
+
+void __init moxart_of_apb_clk_init(struct device_node *node)
+{
+	static void __iomem *base;
+	struct clk *clk, *pll_clk;
+	unsigned long rate;
+	unsigned int div, val;
+	unsigned int div_idx[] = { 2, 3, 4, 6, 8};
+	const char *name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &name);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return;
+	}
+
+	val = readl(base + 0xc) >> 4 & 0x7;
+	iounmap(base);
+
+	if (val > 4)
+		val = 0;
+	div = div_idx[val];
+
+	pll_clk = of_clk_get(node, 0);
+	if (IS_ERR(pll_clk)) {
+		pr_err("%s: of_clk_get failed\n", node->full_name);
+		return;
+	}
+
+	rate = clk_get_rate(pll_clk) / (div * 2);
+
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register_fixed_rate failed\n", node->full_name);
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, name);
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_apb_clock, "moxa,moxart-apb-clock",
+	       moxart_of_apb_clk_init);
-- 
1.8.2.1