[PATCHv3 12/41] OMAPDSS: Add DT support to VENC
Tomi Valkeinen
tomi.valkeinen at ti.com
Tue Jan 21 05:56:44 EST 2014
Add DT support to VENC.
In contrast to non-DT version, the DT version gets the invert-polarity
and connector type via venc's endpoint, not from the connector.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
drivers/video/omap2/dss/venc.c | 61 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index c0e4def29795..b962a01961f5 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -34,6 +34,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <video/omapdss.h>
@@ -808,6 +809,48 @@ static void __exit venc_uninit_output(struct platform_device *pdev)
omapdss_unregister_output(out);
}
+static int venc_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *ep;
+ u32 channels;
+ int r;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ venc.invert_polarity = of_property_read_bool(ep, "ti,invert-polarity");
+
+ r = of_property_read_u32(ep, "ti,channels", &channels);
+ if (r) {
+ dev_err(&pdev->dev,
+ "failed to read property 'ti,channels': %d\n", r);
+ goto err;
+ }
+
+ switch (channels) {
+ case 1:
+ venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE;
+ break;
+ case 2:
+ venc.type = OMAP_DSS_VENC_TYPE_SVIDEO;
+ break;
+ default:
+ dev_err(&pdev->dev, "bad channel propert '%d'\n", channels);
+ r = -EINVAL;
+ goto err;
+ }
+
+ of_node_put(ep);
+
+ return 0;
+err:
+ of_node_put(ep);
+
+ return 0;
+}
+
/* VENC HW IP initialisation */
static int omap_venchw_probe(struct platform_device *pdev)
{
@@ -849,12 +892,21 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_runtime_put();
+ if (pdev->dev.of_node) {
+ r = venc_probe_of(pdev);
+ if (r) {
+ DSSERR("Invalid DT data\n");
+ goto err_probe_of;
+ }
+ }
+
dss_debugfs_create_file("venc", venc_dump_regs);
venc_init_output(pdev);
return 0;
+err_probe_of:
err_runtime_get:
pm_runtime_disable(&pdev->dev);
return r;
@@ -898,6 +950,14 @@ static const struct dev_pm_ops venc_pm_ops = {
.runtime_resume = venc_runtime_resume,
};
+
+static const struct of_device_id venc_of_match[] = {
+ { .compatible = "ti,omap2-venc", },
+ { .compatible = "ti,omap3-venc", },
+ { .compatible = "ti,omap4-venc", },
+ {},
+};
+
static struct platform_driver omap_venchw_driver = {
.probe = omap_venchw_probe,
.remove = __exit_p(omap_venchw_remove),
@@ -905,6 +965,7 @@ static struct platform_driver omap_venchw_driver = {
.name = "omapdss_venc",
.owner = THIS_MODULE,
.pm = &venc_pm_ops,
+ .of_match_table = venc_of_match,
},
};
--
1.8.3.2
More information about the linux-arm-kernel
mailing list