[PATCH 1/3] mmc: add support for power-on sequencing through DT

[Sascha Hauer]

On Tue, Jan 21, 2014 at 08:24:47AM +0100, Sascha Hauer wrote:
> On Sun, Jan 19, 2014 at 07:56:53PM -0800, Olof Johansson wrote:
> > +Card power and reset control:
> > +The following properties can be specified for cases where the MMC
> > +peripheral needs additional reset, regulator and clock lines. It is for
> > +example common for WiFi/BT adapters to have these separate from the main
> > +MMC bus:
> > +  - card-reset-gpios: Specify GPIOs for card reset (reset active low)
> 
> We have GPIO_ACTIVE_LOW/HIGH. No need to hardcode this.

Fabio already spotted that. Sorry for the noise.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |