[PATCH v2 02/11] iommu/arm-smmu: Introduce iommu_group notifier block

[Andreas Herrmann]

At the moment just handle BUS_NOTIFY_BIND_DRIVER to conditionally
isolate all master devices for an SMMU.

Depending on DT information each device is put into its own protection
domain (if possible).  For configuration with one or just a few
masters per SMMU that is easy to achieve.

In case of many devices per SMMU (e.g. MMU-500 with it's distributed
translation support) isolation of each device might not be possible --
depending on number of available SMR groups and/or context banks.

Default is that device isolation is contolled per SMMU with SMMU node
property "arm,smmu-isolate-devices" in a DT. If this property is set
for an SMMU node, device isolation is performed.

W/o device isolation the driver detects SMMUs but no translation is
configured (transactions just bypass translation process).

Note that for device isolation dma_base and size are fixed as 0 and
SZ_128M at the moment. Additional patches will address this
restriction and allow automatic growth of mapping size.

Cc: Varun Sethi <Varun.Sethi at freescale.com>
Cc: Andreas Herrmann <herrmann.der.user at googlemail.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann at calxeda.com>
---
 drivers/iommu/arm-smmu.c |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

Hi Will,

This new patch addresses Varun's comments:
 - use iommu_group notifier instead of bus notifier
 - remove superfluous call to arm_smmu_add_device in
   notifier function

This patch depends on commit "iommu/arm-smmu: add devices attached to
the SMMU to an IOMMU group" as found in your git tree (e.g. in branch
iommu/devel or for-joerg/arm-smmu/updates).


Andreas

diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 0a5649f..edd0ffb 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -46,6 +46,7 @@
 #include <linux/amba/bus.h>
 
 #include <asm/pgalloc.h>
+#include <asm/dma-iommu.h>
 
 /* Driver options */
 #define ARM_SMMU_OPT_ISOLATE_DEVICES		(1 << 0)
@@ -402,6 +403,13 @@ struct arm_smmu_domain {
 static DEFINE_SPINLOCK(arm_smmu_devices_lock);
 static LIST_HEAD(arm_smmu_devices);
 
+static int arm_smmu_group_notifier(struct notifier_block *nb,
+				unsigned long action, void *data);
+
+static struct notifier_block group_nb = {
+	.notifier_call = arm_smmu_group_notifier,
+};
+
 struct arm_smmu_option_prop {
 	u32 opt;
 	const char *prop;
@@ -1566,6 +1574,8 @@ static int arm_smmu_add_device(struct device *dev)
 		return PTR_ERR(group);
 	}
 
+	iommu_group_register_notifier(group, &group_nb);
+
 	ret = iommu_group_add_device(group, dev);
 	iommu_group_put(group);
 	dev->archdata.iommu = smmu;
@@ -1981,6 +1991,43 @@ static int arm_smmu_device_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int arm_smmu_group_notifier(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct dma_iommu_mapping *mapping;
+	struct arm_smmu_device *smmu;
+	int ret;
+
+	switch (action) {
+	case BUS_NOTIFY_BIND_DRIVER:
+
+		smmu = dev->archdata.iommu;
+		if (!smmu || !(smmu->options & ARM_SMMU_OPT_ISOLATE_DEVICES))
+			break;
+
+		mapping = arm_iommu_create_mapping(&platform_bus_type,
+						0, SZ_128M, 0);
+		if (IS_ERR(mapping)) {
+			ret = PTR_ERR(mapping);
+			dev_info(dev, "arm_iommu_create_mapping failed\n");
+			break;
+		}
+
+		ret = arm_iommu_attach_device(dev, mapping);
+		if (ret < 0) {
+			dev_info(dev, "arm_iommu_attach_device failed\n");
+			arm_iommu_release_mapping(mapping);
+		}
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_OF
 static struct of_device_id arm_smmu_of_match[] = {
 	{ .compatible = "arm,smmu-v1", },
-- 
1.7.9.5