[PATCH v2 7/7] cpufreq: exynos: remove all exynos specific cpufreq driver support
Lukasz Majewski
l.majewski at samsung.com
Mon Jan 20 03:08:15 EST 2014
Hi Thomas,
> From: Thomas Abraham <thomas.ab at samsung.com>
>
> Exynos4210, Exynos4x12 and Exynos5250 based platforms have switched
> over to use cpufreq-cpu0 driver for cpufreq functionality. So the
> Exynos specific cpufreq drivers for these platforms can be removed.
>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Jaecheol Lee <jc.lee at samsung.com>
> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> ---
> drivers/cpufreq/Kconfig.arm | 36 ----
> drivers/cpufreq/Makefile | 4 -
> drivers/cpufreq/exynos-cpufreq.c | 292
> ----------------------------------
> drivers/cpufreq/exynos-cpufreq.h | 91 -----------
> drivers/cpufreq/exynos4210-cpufreq.c | 157 ------------------
> drivers/cpufreq/exynos4x12-cpufreq.c | 211 ------------------------
> drivers/cpufreq/exynos5250-cpufreq.c | 183 --------------------- 7
> files changed, 0 insertions(+), 974 deletions(-) delete mode 100644
> drivers/cpufreq/exynos-cpufreq.c delete mode 100644
> drivers/cpufreq/exynos-cpufreq.h delete mode 100644
> drivers/cpufreq/exynos4210-cpufreq.c delete mode 100644
> drivers/cpufreq/exynos4x12-cpufreq.c delete mode 100644
> drivers/cpufreq/exynos5250-cpufreq.c
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 3129749..704656d 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -16,42 +16,6 @@ config ARM_DT_BL_CPUFREQ
> This enables probing via DT for Generic CPUfreq driver for
> ARM big.LITTLE platform. This gets frequency tables from DT.
>
> -config ARM_EXYNOS_CPUFREQ
> - bool
> -
> -config ARM_EXYNOS4210_CPUFREQ
> - bool "SAMSUNG EXYNOS4210"
> - depends on CPU_EXYNOS4210
> - default y
> - select ARM_EXYNOS_CPUFREQ
> - help
> - This adds the CPUFreq driver for Samsung EXYNOS4210
> - SoC (S5PV310 or S5PC210).
> -
> - If in doubt, say N.
> -
> -config ARM_EXYNOS4X12_CPUFREQ
> - bool "SAMSUNG EXYNOS4x12"
> - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> - default y
> - select ARM_EXYNOS_CPUFREQ
> - help
> - This adds the CPUFreq driver for Samsung EXYNOS4X12
> - SoC (EXYNOS4212 or EXYNOS4412).
> -
> - If in doubt, say N.
> -
> -config ARM_EXYNOS5250_CPUFREQ
> - bool "SAMSUNG EXYNOS5250"
> - depends on SOC_EXYNOS5250
> - default y
> - select ARM_EXYNOS_CPUFREQ
> - help
> - This adds the CPUFreq driver for Samsung EXYNOS5250
> - SoC.
> -
> - If in doubt, say N.
> -
> config ARM_EXYNOS5440_CPUFREQ
> bool "SAMSUNG EXYNOS5440"
> depends on SOC_EXYNOS5440
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 7494565..3abfe05 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -49,10 +49,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) +=
> arm_big_little_dt.o
> obj-$(CONFIG_ARCH_DAVINCI_DA850) += davinci-cpufreq.o
> obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
> -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
> -obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
> -obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
> -obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
> obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
> obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
> obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
> diff --git a/drivers/cpufreq/exynos-cpufreq.c
> b/drivers/cpufreq/exynos-cpufreq.c deleted file mode 100644
> index fcd2914..0000000
> --- a/drivers/cpufreq/exynos-cpufreq.c
> +++ /dev/null
> @@ -1,292 +0,0 @@
> -/*
> - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS - CPU frequency scaling support for EXYNOS series
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/kernel.h>
> -#include <linux/err.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/slab.h>
> -#include <linux/regulator/consumer.h>
> -#include <linux/cpufreq.h>
> -#include <linux/suspend.h>
> -#include <linux/platform_device.h>
> -
> -#include <plat/cpu.h>
> -
> -#include "exynos-cpufreq.h"
> -
> -static struct exynos_dvfs_info *exynos_info;
> -
> -static struct regulator *arm_regulator;
> -
> -static unsigned int locking_frequency;
> -static bool frequency_locked;
> -static DEFINE_MUTEX(cpufreq_lock);
> -
> -static int exynos_cpufreq_get_index(unsigned int freq)
> -{
> - struct cpufreq_frequency_table *freq_table =
> exynos_info->freq_table;
> - int index;
> -
> - for (index = 0;
> - freq_table[index].frequency != CPUFREQ_TABLE_END;
> index++)
> - if (freq_table[index].frequency == freq)
> - break;
> -
> - if (freq_table[index].frequency == CPUFREQ_TABLE_END)
> - return -EINVAL;
> -
> - return index;
> -}
> -
> -static int exynos_cpufreq_scale(unsigned int target_freq)
> -{
> - struct cpufreq_frequency_table *freq_table =
> exynos_info->freq_table;
> - unsigned int *volt_table = exynos_info->volt_table;
> - struct cpufreq_policy *policy = cpufreq_cpu_get(0);
> - unsigned int arm_volt, safe_arm_volt = 0;
> - unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
> - unsigned int old_freq;
> - int index, old_index;
> - int ret = 0;
> -
> - old_freq = policy->cur;
> -
> - /*
> - * The policy max have been changed so that we cannot get
> proper
> - * old_index with cpufreq_frequency_table_target(). Thus,
> ignore
> - * policy and get the index from the raw frequency table.
> - */
> - old_index = exynos_cpufreq_get_index(old_freq);
> - if (old_index < 0) {
> - ret = old_index;
> - goto out;
> - }
> -
> - index = exynos_cpufreq_get_index(target_freq);
> - if (index < 0) {
> - ret = index;
> - goto out;
> - }
> -
> - /*
> - * ARM clock source will be changed APLL to MPLL temporary
> - * To support this level, need to control regulator for
> - * required voltage level
> - */
> - if (exynos_info->need_apll_change != NULL) {
> - if (exynos_info->need_apll_change(old_index, index)
> &&
> - (freq_table[index].frequency < mpll_freq_khz) &&
> - (freq_table[old_index].frequency < mpll_freq_khz))
> - safe_arm_volt =
> volt_table[exynos_info->pll_safe_idx];
> - }
> - arm_volt = volt_table[index];
> -
> - /* When the new frequency is higher than current frequency */
> - if ((target_freq > old_freq) && !safe_arm_volt) {
> - /* Firstly, voltage up to increase frequency */
> - ret = regulator_set_voltage(arm_regulator, arm_volt,
> arm_volt);
> - if (ret) {
> - pr_err("%s: failed to set cpu voltage to
> %d\n",
> - __func__, arm_volt);
> - return ret;
> - }
> - }
> -
> - if (safe_arm_volt) {
> - ret = regulator_set_voltage(arm_regulator,
> safe_arm_volt,
> - safe_arm_volt);
> - if (ret) {
> - pr_err("%s: failed to set cpu voltage to
> %d\n",
> - __func__, safe_arm_volt);
> - return ret;
> - }
> - }
> -
> - exynos_info->set_freq(old_index, index);
> -
> - /* When the new frequency is lower than current frequency */
> - if ((target_freq < old_freq) ||
> - ((target_freq > old_freq) && safe_arm_volt)) {
> - /* down the voltage after frequency change */
> - ret = regulator_set_voltage(arm_regulator, arm_volt,
> - arm_volt);
> - if (ret) {
> - pr_err("%s: failed to set cpu voltage to
> %d\n",
> - __func__, arm_volt);
> - goto out;
> - }
> - }
> -
> -out:
> - cpufreq_cpu_put(policy);
> -
> - return ret;
> -}
> -
> -static int exynos_target(struct cpufreq_policy *policy, unsigned int
> index) -{
> - struct cpufreq_frequency_table *freq_table =
> exynos_info->freq_table;
> - int ret = 0;
> -
> - mutex_lock(&cpufreq_lock);
> -
> - if (frequency_locked)
> - goto out;
> -
> - ret = exynos_cpufreq_scale(freq_table[index].frequency);
> -
> -out:
> - mutex_unlock(&cpufreq_lock);
> -
> - return ret;
> -}
> -
> -#ifdef CONFIG_PM
> -static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
> -{
> - return 0;
> -}
> -
> -static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
> -{
> - return 0;
> -}
> -#endif
> -
> -/**
> - * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in
> suspend-resume
> - * context
> - * @notifier
> - * @pm_event
> - * @v
> - *
> - * While frequency_locked == true, target() ignores every frequency
> but
> - * locking_frequency. The locking_frequency value is the initial
> frequency,
> - * which is set by the bootloader. In order to eliminate possible
> - * inconsistency in clock values, we save and restore frequencies
> during
> - * suspend and resume and block CPUFREQ activities. Note that the
> standard
> - * suspend/resume cannot be used as they are too deep (syscore_ops)
> for
> - * regulator actions.
> - */
> -static int exynos_cpufreq_pm_notifier(struct notifier_block
> *notifier,
> - unsigned long pm_event, void
> *v) -{
> - int ret;
> -
> - switch (pm_event) {
> - case PM_SUSPEND_PREPARE:
> - mutex_lock(&cpufreq_lock);
> - frequency_locked = true;
> - mutex_unlock(&cpufreq_lock);
> -
> - ret = exynos_cpufreq_scale(locking_frequency);
> - if (ret < 0)
> - return NOTIFY_BAD;
> -
> - break;
> -
> - case PM_POST_SUSPEND:
> - mutex_lock(&cpufreq_lock);
> - frequency_locked = false;
> - mutex_unlock(&cpufreq_lock);
> - break;
> - }
> -
> - return NOTIFY_OK;
> -}
> -
> -static struct notifier_block exynos_cpufreq_nb = {
> - .notifier_call = exynos_cpufreq_pm_notifier,
> -};
> -
> -static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
> -{
> - policy->clk = exynos_info->cpu_clk;
> - return cpufreq_generic_init(policy, exynos_info->freq_table,
> 100000); -}
> -
> -static struct cpufreq_driver exynos_driver = {
> - .flags = CPUFREQ_STICKY |
> CPUFREQ_NEED_INITIAL_FREQ_CHECK,
> - .verify =
> cpufreq_generic_frequency_table_verify,
> - .target_index = exynos_target,
> - .get = cpufreq_generic_get,
> - .init = exynos_cpufreq_cpu_init,
> - .exit = cpufreq_generic_exit,
> - .name = "exynos_cpufreq",
> - .attr = cpufreq_generic_attr,
> -#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
> - .boost_supported = true,
> -#endif
> -#ifdef CONFIG_PM
> - .suspend = exynos_cpufreq_suspend,
> - .resume = exynos_cpufreq_resume,
> -#endif
> -};
> -
> -static int exynos_cpufreq_probe(struct platform_device *pdev)
> -{
> - int ret = -EINVAL;
> -
> - exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
> - if (!exynos_info)
> - return -ENOMEM;
> -
> - if (soc_is_exynos4210())
> - ret = exynos4210_cpufreq_init(exynos_info);
> - else if (soc_is_exynos4212() || soc_is_exynos4412())
> - ret = exynos4x12_cpufreq_init(exynos_info);
> - else if (soc_is_exynos5250())
> - ret = exynos5250_cpufreq_init(exynos_info);
> - else
> - return 0;
> -
> - if (ret)
> - goto err_vdd_arm;
> -
> - if (exynos_info->set_freq == NULL) {
> - pr_err("%s: No set_freq function (ERR)\n", __func__);
> - goto err_vdd_arm;
> - }
> -
> - arm_regulator = regulator_get(NULL, "vdd_arm");
> - if (IS_ERR(arm_regulator)) {
> - pr_err("%s: failed to get resource vdd_arm\n",
> __func__);
> - goto err_vdd_arm;
> - }
> -
> - locking_frequency = clk_get_rate(exynos_info->cpu_clk) /
> 1000; -
> - register_pm_notifier(&exynos_cpufreq_nb);
> -
> - if (cpufreq_register_driver(&exynos_driver)) {
> - pr_err("%s: failed to register cpufreq driver\n",
> __func__);
> - goto err_cpufreq;
> - }
> -
> - return 0;
> -err_cpufreq:
> - unregister_pm_notifier(&exynos_cpufreq_nb);
> -
> - regulator_put(arm_regulator);
> -err_vdd_arm:
> - kfree(exynos_info);
> - return -EINVAL;
> -}
> -
> -static struct platform_driver exynos_cpufreq_platdrv = {
> - .driver = {
> - .name = "exynos-cpufreq",
> - .owner = THIS_MODULE,
> - },
> - .probe = exynos_cpufreq_probe,
> -};
> -module_platform_driver(exynos_cpufreq_platdrv);
> diff --git a/drivers/cpufreq/exynos-cpufreq.h
> b/drivers/cpufreq/exynos-cpufreq.h deleted file mode 100644
> index 3ddade8..0000000
> --- a/drivers/cpufreq/exynos-cpufreq.h
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -/*
> - * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS - CPUFreq support
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -enum cpufreq_level_index {
> - L0, L1, L2, L3, L4,
> - L5, L6, L7, L8, L9,
> - L10, L11, L12, L13, L14,
> - L15, L16, L17, L18, L19,
> - L20,
> -};
> -
> -#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m,
> p, s) \
> - { \
> - .freq = (f) * 1000, \
> - .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3)
> << 12 | \
> - (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7)
> << 28), \
> - .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \
> - .mps = ((m) << 16 | (p) << 8 | (s)), \
> - }
> -
> -struct apll_freq {
> - unsigned int freq;
> - u32 clk_div_cpu0;
> - u32 clk_div_cpu1;
> - u32 mps;
> -};
> -
> -struct exynos_dvfs_info {
> - unsigned long mpll_freq_khz;
> - unsigned int pll_safe_idx;
> - struct clk *cpu_clk;
> - unsigned int *volt_table;
> - struct cpufreq_frequency_table *freq_table;
> - void (*set_freq)(unsigned int, unsigned int);
> - bool (*need_apll_change)(unsigned int, unsigned int);
> -};
> -
> -#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
> -extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
> -#else
> -static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info
> *info) -{
> - return -EOPNOTSUPP;
> -}
> -#endif
> -#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
> -extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
> -#else
> -static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info
> *info) -{
> - return -EOPNOTSUPP;
> -}
> -#endif
> -#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ
> -extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
> -#else
> -static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info
> *info) -{
> - return -EOPNOTSUPP;
> -}
> -#endif
> -
> -#include <plat/cpu.h>
> -#include <mach/map.h>
> -
> -#define EXYNOS4_CLKSRC_CPU (S5P_VA_CMU +
> 0x14200) -#define EXYNOS4_CLKMUX_STATCPU
> (S5P_VA_CMU + 0x14400) -
> -#define EXYNOS4_CLKDIV_CPU (S5P_VA_CMU +
> 0x14500) -#define EXYNOS4_CLKDIV_CPU1
> (S5P_VA_CMU + 0x14504) -#define
> EXYNOS4_CLKDIV_STATCPU (S5P_VA_CMU + 0x14600)
> -#define EXYNOS4_CLKDIV_STATCPU1 (S5P_VA_CMU +
> 0x14604) - -#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
> -#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 <<
> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) -
> -#define EXYNOS5_APLL_LOCK (S5P_VA_CMU +
> 0x00000) -#define EXYNOS5_APLL_CON0
> (S5P_VA_CMU + 0x00100) -#define
> EXYNOS5_CLKMUX_STATCPU (S5P_VA_CMU + 0x00400)
> -#define EXYNOS5_CLKDIV_CPU0 (S5P_VA_CMU +
> 0x00500) -#define EXYNOS5_CLKDIV_CPU1
> (S5P_VA_CMU + 0x00504) -#define
> EXYNOS5_CLKDIV_STATCPU0 (S5P_VA_CMU + 0x00600)
> -#define EXYNOS5_CLKDIV_STATCPU1 (S5P_VA_CMU +
> 0x00604) diff --git a/drivers/cpufreq/exynos4210-cpufreq.c
> b/drivers/cpufreq/exynos4210-cpufreq.c deleted file mode 100644 index
> 40d84c4..0000000 --- a/drivers/cpufreq/exynos4210-cpufreq.c
> +++ /dev/null @@ -1,157 +0,0 @@
> -/*
> - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS4210 - CPU frequency scaling support
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/err.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/slab.h>
> -#include <linux/cpufreq.h>
> -
> -#include "exynos-cpufreq.h"
> -
> -static struct clk *cpu_clk;
> -static struct clk *moutcore;
> -static struct clk *mout_mpll;
> -static struct clk *mout_apll;
> -
> -static unsigned int exynos4210_volt_table[] = {
> - 1250000, 1150000, 1050000, 975000, 950000,
> -};
> -
> -static struct cpufreq_frequency_table exynos4210_freq_table[] = {
> - {L0, 1200 * 1000},
> - {L1, 1000 * 1000},
> - {L2, 800 * 1000},
> - {L3, 500 * 1000},
> - {L4, 200 * 1000},
> - {0, CPUFREQ_TABLE_END},
> -};
> -
> -static struct apll_freq apll_freq_4210[] = {
> - /*
> - * values:
> - * freq
> - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB,
> PCLK_DBG, APLL, RESERVED
> - * clock divider for COPY, HPM, RESERVED
> - * PLL M, P, S
> - */
> - APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
> - APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
> - APLL_FREQ(800, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
> - APLL_FREQ(500, 0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
> - APLL_FREQ(200, 0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
> -};
> -
> -static void exynos4210_set_clkdiv(unsigned int div_index)
> -{
> - unsigned int tmp;
> -
> - /* Change Divider - CPU0 */
> -
> - tmp = apll_freq_4210[div_index].clk_div_cpu0;
> -
> - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
> -
> - do {
> - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
> - } while (tmp & 0x1111111);
> -
> - /* Change Divider - CPU1 */
> -
> - tmp = apll_freq_4210[div_index].clk_div_cpu1;
> -
> - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
> -
> - do {
> - tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
> - } while (tmp & 0x11);
> -}
> -
> -static void exynos4210_set_apll(unsigned int index)
> -{
> - unsigned int tmp, freq = apll_freq_4210[index].freq;
> -
> - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
> - clk_set_parent(moutcore, mout_mpll);
> -
> - do {
> - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
> - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
> - tmp &= 0x7;
> - } while (tmp != 0x2);
> -
> - clk_set_rate(mout_apll, freq * 1000);
> -
> - /* MUX_CORE_SEL = APLL */
> - clk_set_parent(moutcore, mout_apll);
> -
> - do {
> - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
> - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
> - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
> -}
> -
> -static void exynos4210_set_frequency(unsigned int old_index,
> - unsigned int new_index)
> -{
> - if (old_index > new_index) {
> - exynos4210_set_clkdiv(new_index);
> - exynos4210_set_apll(new_index);
> - } else if (old_index < new_index) {
> - exynos4210_set_apll(new_index);
> - exynos4210_set_clkdiv(new_index);
> - }
> -}
> -
> -int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
> -{
> - unsigned long rate;
> -
> - cpu_clk = clk_get(NULL, "armclk");
> - if (IS_ERR(cpu_clk))
> - return PTR_ERR(cpu_clk);
> -
> - moutcore = clk_get(NULL, "moutcore");
> - if (IS_ERR(moutcore))
> - goto err_moutcore;
> -
> - mout_mpll = clk_get(NULL, "mout_mpll");
> - if (IS_ERR(mout_mpll))
> - goto err_mout_mpll;
> -
> - rate = clk_get_rate(mout_mpll) / 1000;
> -
> - mout_apll = clk_get(NULL, "mout_apll");
> - if (IS_ERR(mout_apll))
> - goto err_mout_apll;
> -
> - info->mpll_freq_khz = rate;
> - /* 800Mhz */
> - info->pll_safe_idx = L2;
> - info->cpu_clk = cpu_clk;
> - info->volt_table = exynos4210_volt_table;
> - info->freq_table = exynos4210_freq_table;
> - info->set_freq = exynos4210_set_frequency;
> -
> - return 0;
> -
> -err_mout_apll:
> - clk_put(mout_mpll);
> -err_mout_mpll:
> - clk_put(moutcore);
> -err_moutcore:
> - clk_put(cpu_clk);
> -
> - pr_debug("%s: failed initialization\n", __func__);
> - return -EINVAL;
> -}
> diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c
> b/drivers/cpufreq/exynos4x12-cpufreq.c deleted file mode 100644
> index 7c11ace..0000000
> --- a/drivers/cpufreq/exynos4x12-cpufreq.c
> +++ /dev/null
> @@ -1,211 +0,0 @@
> -/*
> - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS4X12 - CPU frequency scaling support
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/err.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/slab.h>
> -#include <linux/cpufreq.h>
> -
> -#include "exynos-cpufreq.h"
> -
> -static struct clk *cpu_clk;
> -static struct clk *moutcore;
> -static struct clk *mout_mpll;
> -static struct clk *mout_apll;
> -
> -static unsigned int exynos4x12_volt_table[] = {
> - 1350000, 1287500, 1250000, 1187500, 1137500, 1087500,
> 1037500,
> - 1000000, 987500, 975000, 950000, 925000, 900000, 900000
> -};
> -
> -static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
> - {CPUFREQ_BOOST_FREQ, 1500 * 1000},
Here, you are removing BOOST support for Exynos4412, without any code,
which brings back this functionality in the new code.
I'd propose adding new property to cpus node and during
operating-points parsing mark the entry at the cpufreq_frequency_table
accordingly.
> - {L1, 1400 * 1000},
> - {L2, 1300 * 1000},
> - {L3, 1200 * 1000},
> - {L4, 1100 * 1000},
> - {L5, 1000 * 1000},
> - {L6, 900 * 1000},
> - {L7, 800 * 1000},
> - {L8, 700 * 1000},
> - {L9, 600 * 1000},
> - {L10, 500 * 1000},
> - {L11, 400 * 1000},
> - {L12, 300 * 1000},
> - {L13, 200 * 1000},
> - {0, CPUFREQ_TABLE_END},
> -};
> -
> -static struct apll_freq *apll_freq_4x12;
> -
> -static struct apll_freq apll_freq_4212[] = {
> - /*
> - * values:
> - * freq
> - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB,
> PCLK_DBG, APLL, CORE2
> - * clock divider for COPY, HPM, RESERVED
> - * PLL M, P, S
> - */
> - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0),
> - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0),
> - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0),
> - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0),
> - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0),
> - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0),
> - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0),
> - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0),
> - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1),
> - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1),
> - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1),
> - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1),
> - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2),
> - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2),
> -};
> -
> -static struct apll_freq apll_freq_4412[] = {
> - /*
> - * values:
> - * freq
> - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB,
> PCLK_DBG, APLL, CORE2
> - * clock divider for COPY, HPM, CORES
> - * PLL M, P, S
> - */
> - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0),
> - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0),
> - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0),
> - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0),
> - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0),
> - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0),
> - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0),
> - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0),
> - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1),
> - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1),
> - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1),
> - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1),
> - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2),
> - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2),
> -};
> -
> -static void exynos4x12_set_clkdiv(unsigned int div_index)
> -{
> - unsigned int tmp;
> - unsigned int stat_cpu1;
> -
> - /* Change Divider - CPU0 */
> -
> - tmp = apll_freq_4x12[div_index].clk_div_cpu0;
> -
> - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
> -
> - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
> - cpu_relax();
> -
> - /* Change Divider - CPU1 */
> - tmp = apll_freq_4x12[div_index].clk_div_cpu1;
> -
> - __raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
> - if (soc_is_exynos4212())
> - stat_cpu1 = 0x11;
> - else
> - stat_cpu1 = 0x111;
> -
> - while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
> - cpu_relax();
> -}
> -
> -static void exynos4x12_set_apll(unsigned int index)
> -{
> - unsigned int tmp, freq = apll_freq_4x12[index].freq;
> -
> - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
> - clk_set_parent(moutcore, mout_mpll);
> -
> - do {
> - cpu_relax();
> - tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
> - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
> - tmp &= 0x7;
> - } while (tmp != 0x2);
> -
> - clk_set_rate(mout_apll, freq * 1000);
> -
> - /* MUX_CORE_SEL = APLL */
> - clk_set_parent(moutcore, mout_apll);
> -
> - do {
> - cpu_relax();
> - tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
> - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
> - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
> -}
> -
> -static void exynos4x12_set_frequency(unsigned int old_index,
> - unsigned int new_index)
> -{
> - if (old_index > new_index) {
> - exynos4x12_set_clkdiv(new_index);
> - exynos4x12_set_apll(new_index);
> - } else if (old_index < new_index) {
> - exynos4x12_set_apll(new_index);
> - exynos4x12_set_clkdiv(new_index);
> - }
> -}
> -
> -int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
> -{
> - unsigned long rate;
> -
> - cpu_clk = clk_get(NULL, "armclk");
> - if (IS_ERR(cpu_clk))
> - return PTR_ERR(cpu_clk);
> -
> - moutcore = clk_get(NULL, "moutcore");
> - if (IS_ERR(moutcore))
> - goto err_moutcore;
> -
> - mout_mpll = clk_get(NULL, "mout_mpll");
> - if (IS_ERR(mout_mpll))
> - goto err_mout_mpll;
> -
> - rate = clk_get_rate(mout_mpll) / 1000;
> -
> - mout_apll = clk_get(NULL, "mout_apll");
> - if (IS_ERR(mout_apll))
> - goto err_mout_apll;
> -
> - if (soc_is_exynos4212())
> - apll_freq_4x12 = apll_freq_4212;
> - else
> - apll_freq_4x12 = apll_freq_4412;
> -
> - info->mpll_freq_khz = rate;
> - /* 800Mhz */
> - info->pll_safe_idx = L7;
> - info->cpu_clk = cpu_clk;
> - info->volt_table = exynos4x12_volt_table;
> - info->freq_table = exynos4x12_freq_table;
> - info->set_freq = exynos4x12_set_frequency;
> -
> - return 0;
> -
> -err_mout_apll:
> - clk_put(mout_mpll);
> -err_mout_mpll:
> - clk_put(moutcore);
> -err_moutcore:
> - clk_put(cpu_clk);
> -
> - pr_debug("%s: failed initialization\n", __func__);
> - return -EINVAL;
> -}
> diff --git a/drivers/cpufreq/exynos5250-cpufreq.c
> b/drivers/cpufreq/exynos5250-cpufreq.c deleted file mode 100644
> index 5f90b82..0000000
> --- a/drivers/cpufreq/exynos5250-cpufreq.c
> +++ /dev/null
> @@ -1,183 +0,0 @@
> -/*
> - * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS5250 - CPU frequency scaling support
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/err.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> -#include <linux/slab.h>
> -#include <linux/cpufreq.h>
> -
> -#include <mach/map.h>
> -
> -#include "exynos-cpufreq.h"
> -
> -static struct clk *cpu_clk;
> -static struct clk *moutcore;
> -static struct clk *mout_mpll;
> -static struct clk *mout_apll;
> -
> -static unsigned int exynos5250_volt_table[] = {
> - 1300000, 1250000, 1225000, 1200000, 1150000,
> - 1125000, 1100000, 1075000, 1050000, 1025000,
> - 1012500, 1000000, 975000, 950000, 937500,
> - 925000
> -};
> -
> -static struct cpufreq_frequency_table exynos5250_freq_table[] = {
> - {L0, 1700 * 1000},
> - {L1, 1600 * 1000},
> - {L2, 1500 * 1000},
> - {L3, 1400 * 1000},
> - {L4, 1300 * 1000},
> - {L5, 1200 * 1000},
> - {L6, 1100 * 1000},
> - {L7, 1000 * 1000},
> - {L8, 900 * 1000},
> - {L9, 800 * 1000},
> - {L10, 700 * 1000},
> - {L11, 600 * 1000},
> - {L12, 500 * 1000},
> - {L13, 400 * 1000},
> - {L14, 300 * 1000},
> - {L15, 200 * 1000},
> - {0, CPUFREQ_TABLE_END},
> -};
> -
> -static struct apll_freq apll_freq_5250[] = {
> - /*
> - * values:
> - * freq
> - * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG,
> APLL, ARM2
> - * clock divider for COPY, HPM, RESERVED
> - * PLL M, P, S
> - */
> - APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0),
> - APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0),
> - APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0),
> - APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0),
> - APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0),
> - APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0),
> - APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0),
> - APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0),
> - APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0),
> - APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0),
> - APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1),
> - APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1),
> - APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1),
> - APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1),
> - APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2),
> - APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2),
> -};
> -
> -static void set_clkdiv(unsigned int div_index)
> -{
> - unsigned int tmp;
> -
> - /* Change Divider - CPU0 */
> -
> - tmp = apll_freq_5250[div_index].clk_div_cpu0;
> -
> - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
> -
> - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
> - cpu_relax();
> -
> - /* Change Divider - CPU1 */
> - tmp = apll_freq_5250[div_index].clk_div_cpu1;
> -
> - __raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
> -
> - while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
> - cpu_relax();
> -}
> -
> -static void set_apll(unsigned int index)
> -{
> - unsigned int tmp;
> - unsigned int freq = apll_freq_5250[index].freq;
> -
> - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
> - clk_set_parent(moutcore, mout_mpll);
> -
> - do {
> - cpu_relax();
> - tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
> - tmp &= 0x7;
> - } while (tmp != 0x2);
> -
> - clk_set_rate(mout_apll, freq * 1000);
> -
> - /* MUX_CORE_SEL = APLL */
> - clk_set_parent(moutcore, mout_apll);
> -
> - do {
> - cpu_relax();
> - tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
> - tmp &= (0x7 << 16);
> - } while (tmp != (0x1 << 16));
> -}
> -
> -static void exynos5250_set_frequency(unsigned int old_index,
> - unsigned int new_index)
> -{
> - if (old_index > new_index) {
> - set_clkdiv(new_index);
> - set_apll(new_index);
> - } else if (old_index < new_index) {
> - set_apll(new_index);
> - set_clkdiv(new_index);
> - }
> -}
> -
> -int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
> -{
> - unsigned long rate;
> -
> - cpu_clk = clk_get(NULL, "armclk");
> - if (IS_ERR(cpu_clk))
> - return PTR_ERR(cpu_clk);
> -
> - moutcore = clk_get(NULL, "mout_cpu");
> - if (IS_ERR(moutcore))
> - goto err_moutcore;
> -
> - mout_mpll = clk_get(NULL, "mout_mpll");
> - if (IS_ERR(mout_mpll))
> - goto err_mout_mpll;
> -
> - rate = clk_get_rate(mout_mpll) / 1000;
> -
> - mout_apll = clk_get(NULL, "mout_apll");
> - if (IS_ERR(mout_apll))
> - goto err_mout_apll;
> -
> - info->mpll_freq_khz = rate;
> - /* 800Mhz */
> - info->pll_safe_idx = L9;
> - info->cpu_clk = cpu_clk;
> - info->volt_table = exynos5250_volt_table;
> - info->freq_table = exynos5250_freq_table;
> - info->set_freq = exynos5250_set_frequency;
> -
> - return 0;
> -
> -err_mout_apll:
> - clk_put(mout_mpll);
> -err_mout_mpll:
> - clk_put(moutcore);
> -err_moutcore:
> - clk_put(cpu_clk);
> -
> - pr_err("%s: failed initialization\n", __func__);
> - return -EINVAL;
> -}
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the linux-arm-kernel
mailing list