[PATCH] pwm: Remove obsolete HAVE_PWM Kconfig symbol
Eric Miao
eric.y.miao at gmail.com
Fri Jan 17 13:51:14 EST 2014
On Thu, Jan 16, 2014 at 7:01 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> Before we had the PWM framework we used to have a barebone PWM api. The
> HAVE_PWM Kconfig symbol used to be selected by the PWM drivers to specify
> the PWM API is present in the kernel. Since the last legacy driver is gone
> the HAVE_PWM symbol can go aswell.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Looks good to me, happy to see it gone.
> ---
>
> I suggest that Thierry as PWM Maintainer takes the patch through his tree.
> Is that ok for you Thierry?
>
> arch/arm/Kconfig | 4 ----
> arch/arm/mach-pxa/Kconfig | 15 ---------------
> arch/mips/Kconfig | 1 -
> drivers/input/misc/Kconfig | 4 ++--
> include/linux/pwm.h | 2 +-
> 5 files changed, 3 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index c1f1a7e..1b6f499 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -109,9 +109,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
>
> endif
>
> -config HAVE_PWM
> - bool
> -
> config MIGHT_HAVE_PCI
> bool
>
> @@ -606,7 +603,6 @@ config ARCH_LPC32XX
> select CPU_ARM926T
> select GENERIC_CLOCKEVENTS
> select HAVE_IDE
> - select HAVE_PWM
> select USB_ARCH_HAS_OHCI
> select USE_OF
> help
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index 96100db..b96244c 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -7,7 +7,6 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
> config MACH_PXA3XX_DT
> bool "Support PXA3xx platforms from device tree"
> select CPU_PXA300
> - select HAVE_PWM
> select POWER_SUPPLY
> select PXA3xx
> select USE_OF
> @@ -23,12 +22,10 @@ config ARCH_LUBBOCK
>
> config MACH_MAINSTONE
> bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
> - select HAVE_PWM
> select PXA27x
>
> config MACH_ZYLONITE
> bool
> - select HAVE_PWM
> select PXA3xx
>
> config MACH_ZYLONITE300
> @@ -69,7 +66,6 @@ config ARCH_PXA_IDP
> config ARCH_VIPER
> bool "Arcom/Eurotech VIPER SBC"
> select ARCOM_PCMCIA
> - select HAVE_PWM
> select I2C_GPIO
> select ISA
> select PXA25x
> @@ -120,7 +116,6 @@ config MACH_CM_X300
> bool "CompuLab CM-X300 modules"
> select CPU_PXA300
> select CPU_PXA310
> - select HAVE_PWM
> select PXA3xx
>
> config MACH_CAPC7117
> @@ -211,7 +206,6 @@ config TRIZEPS_PCMCIA
>
> config MACH_LOGICPD_PXA270
> bool "LogicPD PXA270 Card Engine Development Platform"
> - select HAVE_PWM
> select PXA27x
>
> config MACH_PCM027
> @@ -222,7 +216,6 @@ config MACH_PCM027
> config MACH_PCM990_BASEBOARD
> bool "PHYTEC PCM-990 development board"
> depends on MACH_PCM027
> - select HAVE_PWM
>
> choice
> prompt "display on pcm990"
> @@ -246,7 +239,6 @@ config MACH_COLIBRI
> config MACH_COLIBRI_PXA270_INCOME
> bool "Income s.r.o. PXA270 SBC"
> depends on MACH_COLIBRI
> - select HAVE_PWM
> select PXA27x
>
> config MACH_COLIBRI300
> @@ -275,7 +267,6 @@ comment "End-user Products (sorted by vendor name)"
>
> config MACH_H4700
> bool "HP iPAQ hx4700"
> - select HAVE_PWM
> select IWMMXT
> select PXA27x
>
> @@ -289,14 +280,12 @@ config MACH_HIMALAYA
>
> config MACH_MAGICIAN
> bool "Enable HTC Magician Support"
> - select HAVE_PWM
> select IWMMXT
> select PXA27x
>
> config MACH_MIOA701
> bool "Mitac Mio A701 Support"
> select GPIO_SYSFS
> - select HAVE_PWM
> select IWMMXT
> select PXA27x
> help
> @@ -306,7 +295,6 @@ config MACH_MIOA701
>
> config PXA_EZX
> bool "Motorola EZX Platform"
> - select HAVE_PWM
> select IWMMXT
> select PXA27x
>
> @@ -346,7 +334,6 @@ config MACH_MP900C
>
> config ARCH_PXA_PALM
> bool "PXA based Palm PDAs"
> - select HAVE_PWM
>
> config MACH_PALM27X
> bool
> @@ -444,7 +431,6 @@ config MACH_TREO680
> config MACH_RAUMFELD_RC
> bool "Raumfeld Controller"
> select CPU_PXA300
> - select HAVE_PWM
> select POWER_SUPPLY
> select PXA3xx
>
> @@ -608,7 +594,6 @@ config MACH_E800
>
> config MACH_ZIPIT2
> bool "Zipit Z2 Handheld"
> - select HAVE_PWM
> select PXA27x
> endmenu
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 650de39..ce62af8 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -233,7 +233,6 @@ config MACH_JZ4740
> select IRQ_CPU
> select ARCH_REQUIRE_GPIOLIB
> select SYS_HAS_EARLY_PRINTK
> - select HAVE_PWM
> select HAVE_CLK
> select GENERIC_IRQ_CHIP
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 5f4967d..bc6ec8e 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -156,7 +156,7 @@ config INPUT_MAX8925_ONKEY
>
> config INPUT_MAX8997_HAPTIC
> tristate "MAXIM MAX8997 haptic controller support"
> - depends on PWM && HAVE_PWM && MFD_MAX8997
> + depends on PWM && MFD_MAX8997
> select INPUT_FF_MEMLESS
> help
> This option enables device driver support for the haptic controller
> @@ -461,7 +461,7 @@ config INPUT_PCF8574
>
> config INPUT_PWM_BEEPER
> tristate "PWM beeper support"
> - depends on PWM && HAVE_PWM
> + depends on PWM
> help
> Say Y here to get support for PWM based beeper devices.
>
> diff --git a/include/linux/pwm.h b/include/linux/pwm.h
> index f0feafd..4717f54 100644
> --- a/include/linux/pwm.h
> +++ b/include/linux/pwm.h
> @@ -7,7 +7,7 @@
> struct pwm_device;
> struct seq_file;
>
> -#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
> +#if IS_ENABLED(CONFIG_PWM)
> /*
> * pwm_request - request a PWM device
> */
> --
> 1.8.5.2
>
More information about the linux-arm-kernel
mailing list