[PATCH 1/2] ARM: move flexcan1 configuration to hummingboard

[Russell King]

Flexcan1 is not used on the cubox-i, so move it out of the microsom.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 arch/arm/boot/dts/imx6dl-hummingboard.dts | 13 +++++++++++++
 arch/arm/boot/dts/imx6qdl-microsom.dtsi   | 13 -------------
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 6184b0366926..e22f3d855c02 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -36,6 +36,12 @@
 	};
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1_1>;
@@ -53,6 +59,13 @@
 
 &iomuxc {
 	hummingboard {
+		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+			>;
+		};
+
 		pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index 8aa31a842236..965ac4c1f509 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -36,21 +36,8 @@
 	};
 };
 
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_flexcan1>;
-	status = "okay";
-};
-
 &iomuxc {
 	microsom {
-		pinctrl_microsom_flexcan1: microsom-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
 		pinctrl_microsom_usbotg: microsom-usbotg {
 			/*
 			 * Similar to pinctrl_usbotg_2, but we want it
-- 
1.8.3.1