[PATCH V7 3/3] ARM: imx: add suspend in ocram support for i.mx6sl

Anson Huang b20788 at freescale.com
Thu Jan 16 04:35:07 EST 2014


i.MX6SL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~10mA at 1.2V to ~1mA at 1.2V,
measured on i.MX6SL EVK board, SH5.

Signed-off-by: Anson Huang <b20788 at freescale.com>
---
 arch/arm/mach-imx/Makefile       |    2 +-
 arch/arm/mach-imx/pm-imx6q.c     |   20 +++++++++++++++++++-
 arch/arm/mach-imx/suspend-imx6.S |   28 ++++++++++++++++++++++++++--
 3 files changed, 46 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 3d96a45..f2df89f 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -105,7 +105,7 @@ ifeq ($(CONFIG_PM),y)
 AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o suspend-imx6.o
 # i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o suspend-imx6.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index fc57340..0db9456 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -121,6 +121,14 @@ static const u32 imx6dl_mmdc_io_offset[] = {
 	0x74c,			    /* GPR_ADDS */
 };
 
+static const u32 imx6sl_mmdc_io_offset[] = {
+	0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
+	0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
+	0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+	0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
+};
+
 static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
 	.cpu_type = MXC_CPU_IMX6Q,
 	.mmdc_compat = "fsl,imx6q-mmdc",
@@ -141,6 +149,16 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
 	.mmdc_io_offset = imx6dl_mmdc_io_offset,
 };
 
+static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6SL,
+	.mmdc_compat = "fsl,imx6sl-mmdc",
+	.src_compat = "fsl,imx6sl-src",
+	.iomuxc_compat = "fsl,imx6sl-iomuxc",
+	.gpc_compat = "fsl,imx6sl-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
+	.mmdc_io_offset = imx6sl_mmdc_io_offset,
+};
+
 /*
  * This structure is for passing necessary data for low level ocram
  * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -532,5 +550,5 @@ void __init imx6dl_pm_init(void)
 
 void __init imx6sl_pm_init(void)
 {
-	imx6_pm_common_init(NULL);
+	imx6_pm_common_init(&imx6sl_pm_data);
 }
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index d273ee7..f9694d5 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -63,6 +63,7 @@
 #define MX6Q_SRC_GPR1	0x20
 #define MX6Q_SRC_GPR2	0x24
 #define MX6Q_MMDC_MAPSR	0x404
+#define MX6Q_MMDC_MPDGCTRL0	0x83c
 #define MX6Q_GPC_IMR1	0x08
 #define MX6Q_GPC_IMR2	0x0c
 #define MX6Q_GPC_IMR3	0x10
@@ -107,14 +108,36 @@
 	ldreq	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
 	ldrne	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
 
+	cmp 	r3, #MXC_CPU_IMX6SL
+	bne	4f
+
+	/* reset read FIFO, RST_RD_FIFO */
+	ldr	r7, =MX6Q_MMDC_MPDGCTRL0
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+2:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	2b
+
+	/* reset FIFO a second time */
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+3:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	3b
+4:
 	/* let DDR out of self-refresh */
 	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
 	bic	r7, r7, #(1 << 21)
 	str	r7, [r11, #MX6Q_MMDC_MAPSR]
-2:
+5:
 	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
 	ands	r7, r7, #(1 << 25)
-	bne	2b
+	bne	5b
 
 	/* enable DDR auto power saving */
 	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
@@ -282,6 +305,7 @@ resume:
 	str	r7, [r11, #MX6Q_SRC_GPR1]
 	str	r7, [r11, #MX6Q_SRC_GPR2]
 
+	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
 	mov	r5, #0x1
 	resume_mmdc
 
-- 
1.7.9.5





More information about the linux-arm-kernel mailing list