[PATCH] ARM: sunxi: Add driver for sunxi usb phy
Maxime Ripard
maxime.ripard at free-electrons.com
Wed Jan 15 17:52:55 EST 2014
Hi Hans,
Please keep me in CC for all the Allwinner-related patches.
On Tue, Jan 14, 2014 at 11:58:25PM +0100, Hans de Goede wrote:
> The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed
> through a single set of registers. Besides this there are also some other
> phy related bits which need poking, which are per phy, but shared between the
> ohci and ehci controllers, so these are also controlled from this new phy
> driver.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> .../devicetree/bindings/phy/sun4i-usb-phy.txt | 26 ++
> drivers/phy/Kconfig | 11 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-sun4i-usb.c | 318 +++++++++++++++++++++
> 4 files changed, 356 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> create mode 100644 drivers/phy/phy-sun4i-usb.c
>
> diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> new file mode 100644
> index 0000000..6c54b3b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> @@ -0,0 +1,26 @@
> +Allwinner sun4i USB PHY
> +-----------------------
> +
> +Required properties:
> +- compatible : should be one of "allwinner,sun4i-a10-usb-phy",
It is sun4i-usb-phy.
> + "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy"
> +- reg : 2 or 3 register offset + length pairs, 1 phy base reg pair +
> + 1 pair for the pmu-irq register of each hcd
In which order they should be set? Maybe you should use reg-names here
to clarify things. From that documentation, I have no idea how I
should put the values if I just want the common stuff and the (for
example) usb1 configuration.
> +- #phy-cells : from the generic phy bindings, must be 1
> +
> +Optional properties:
> +- clocks : phandle + clock specifier for the phy clock
> +- clock-names : "usb_phy"
> +- resets : a list of phandle + reset specifier pairs
> +- reset-names : "usb0_reset", "usb1_reset", and / or "usb2_reset"
> +
> +Example:
> + usbphy: phy at 0x01c13400 {
> + #phy-cells = <1>;
> + compatible = "allwinner,sun4i-a10-usb-phy";
> + reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
If you prefer not to use reg-names after all, please put a comment
stating what each pair correspond to.
> + clocks = <&usb_clk 8>;
> + clock-names = "usb_phy";
> + resets = <&usb_clk 1>, <&usb_clk 2>;
> + reset-names = "usb1_reset", "usb2_reset";
> + };
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 330ef2d..dcce4cf 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -51,4 +51,15 @@ config PHY_EXYNOS_DP_VIDEO
> help
> Support for Display Port PHY found on Samsung EXYNOS SoCs.
>
> +config PHY_SUN4I_USB
> + tristate "Allwinner sunxi SoC USB PHY driver"
> + depends on ARCH_SUNXI
> + select GENERIC_PHY
> + help
> + Enable this to support the transceiver that is part of Allwinner
> + sunxi SoCs.
> +
> + This driver controls the entire USB PHY block, both the USB OTG
> + parts, as well as the 2 regular USB 2 host PHYs.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index d0caae9..e9e82f0 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> new file mode 100644
> index 0000000..a15ecc1
> --- /dev/null
> +++ b/drivers/phy/phy-sun4i-usb.c
> @@ -0,0 +1,318 @@
> +/*
> + * Allwinner sun4i USB phy driver
> + *
> + * Copyright (C) 2014 Hans de Goede <hdegoede at redhat.com>
> + *
> + * Based on code from
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Author: Sylwester Nawrocki <s.nawrocki at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +
> +#define REG_ISCR 0x00
> +#define REG_PHYCTL 0x04
> +#define REG_PHYBIST 0x08
> +#define REG_PHYTUNE 0x0c
> +
> +#define SUNXI_AHB_ICHR8_EN BIT(10)
> +#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
> +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
> +#define SUNXI_ULPI_BYPASS_EN BIT(0)
> +
> +#define MAX_PHYS 3
> +
> +struct sun4i_usb_phy_data {
> + struct clk *clk;
> + void __iomem *base;
> + struct mutex mutex;
> + int num_phys;
> + u32 disc_thresh;
> + struct sun4i_usb_phy {
> + struct phy *phy;
> + void __iomem *pmu_irq;
> + struct regulator *vbus;
> + struct reset_control *reset;
> + int index;
> + } phys[MAX_PHYS];
> +};
> +
> +#define to_sun4i_usb_phy_data(phy) \
> + container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
> +
> +static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
> + int len)
> +{
> + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
> + u32 temp, usbc_bit = BIT(phy->index * 2);
> + int i;
> +
> + mutex_lock(&phy_data->mutex);
> +
> + for (i = 0; i < len; i++) {
> + temp = readl(phy_data->base + REG_PHYCTL);
> +
> + /* clear the address portion */
> + temp &= ~(0xff << 8);
> +
> + /* set the address */
> + temp |= ((addr + i) << 8);
> + writel(temp, phy_data->base + REG_PHYCTL);
> +
> + /* set the data bit and clear usbc bit*/
> + temp = readb(phy_data->base + REG_PHYCTL);
> + if (data & 0x1)
> + temp |= BIT(7);
> + else
> + temp &= ~BIT(7);
> + temp &= ~usbc_bit;
> + writeb(temp, phy_data->base + REG_PHYCTL);
> +
> + /* pulse usbc_bit */
> + temp = readb(phy_data->base + REG_PHYCTL);
> + temp |= usbc_bit;
> + writeb(temp, phy_data->base + REG_PHYCTL);
> +
> + temp = readb(phy_data->base + REG_PHYCTL);
> + temp &= ~usbc_bit;
> + writeb(temp, phy_data->base + REG_PHYCTL);
> +
> + data >>= 1;
> + }
> + mutex_unlock(&phy_data->mutex);
> +}
> +
> +static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
> +{
> + u32 bits, reg_value;
> +
> + if (!phy->pmu_irq)
> + return;
> +
> + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
> + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
> +
> + reg_value = readl(phy->pmu_irq);
> +
> + if (enable)
> + reg_value |= bits;
> + else
> + reg_value &= ~bits;
> +
> + writel(reg_value, phy->pmu_irq);
> +}
> +
> +static int sun4i_usb_phy_init(struct phy *_phy)
> +{
> + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
> + int ret;
> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret)
> + return ret;
> +
> + ret = reset_control_deassert(phy->reset);
> + if (ret) {
> + clk_disable_unprepare(data->clk);
> + return ret;
> + }
> +
> + /* Adjust PHY's magnitude and rate */
> + sun4i_usb_phy_write(phy, 0x20, 0x14, 5);
> +
> + /* Disconnect threshold adjustment */
> + sun4i_usb_phy_write(phy, 0x2a, data->disc_thresh, 2);
> +
> + sun4i_usb_phy_passby(phy, 1);
> +
> + return 0;
> +}
> +
> +static int sun4i_usb_phy_exit(struct phy *_phy)
> +{
> + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
> +
> + sun4i_usb_phy_passby(phy, 0);
> + reset_control_assert(phy->reset);
> + clk_disable_unprepare(data->clk);
> +
> + return 0;
> +}
> +
> +static int sun4i_usb_phy_power_on(struct phy *_phy)
> +{
> + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> + int ret;
> +
> + if (phy->vbus) {
> + ret = regulator_enable(phy->vbus);
> + if (ret)
> + return ret;
> +
> + }
> +
> + return 0;
> +}
> +
> +static int sun4i_usb_phy_power_off(struct phy *_phy)
> +{
> + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> +
> + if (phy->vbus)
> + regulator_disable(phy->vbus);
> +
> + return 0;
> +}
> +
> +static struct phy_ops sun4i_usb_phy_ops = {
> + .init = sun4i_usb_phy_init,
> + .exit = sun4i_usb_phy_exit,
> + .power_on = sun4i_usb_phy_power_on,
> + .power_off = sun4i_usb_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *sun4i_usb_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
> +
> + if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys))
> + return ERR_PTR(-ENODEV);
> +
> + return data->phys[args->args[0]].phy;
> +}
> +
> +static int sun4i_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct sun4i_usb_phy_data *data;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + void __iomem *pmu_irq = NULL;
> + struct phy_provider *phy_provider;
> + struct reset_control *reset;
> + struct regulator *vbus;
> + struct phy *phy;
> + char name[16];
> + int i;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + mutex_init(&data->mutex);
> + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy")) {
> + data->num_phys = 3;
> + data->disc_thresh = 3;
> + } else if (of_device_is_compatible(np,
> + "allwinner,sun5i-a13-usb-phy")) {
> + data->num_phys = 2;
> + data->disc_thresh = 2;
> + } else { /* allwinner,sun7i-a20-usb-phy */
> + data->num_phys = 3;
> + data->disc_thresh = 2;
> + }
Maybe we can use of_match_data() here instead of having an ever-growing
list of if-else statements?
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140115/5feda29e/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list